Conference unifix::sailing

    Very nice.
    
    This procedure loads characters into the definable font and, therefore,
    should work on any REAL VT200 class terminal.  I assume that the
    VT300 class would also work.
    
    Don

    I like the idea, but it creates smosh on a GPX...  can you whip
    one up that works on a workstation?
    
       - Jim
    

>    I like the idea, but it creates smosh on a GPX...  can you whip
>    one up that works on a workstation?
    
	I just made one up today.  I have updated the cursor.com file
that builds the stuff to set up the cursor command.  I also added one
'other' image and took the ones that crash my gpx!!  The one file you need
is at MTBLUE::SYS$USER4:[PEASE_DAVE]CURSOR.COM.  Execute it then read the
first few pages of cursor.com that tell you how to set it up.

	Dave    

    I got a call from someone who was having trouble getting the prompt
    to work and their problem was that they were trying to type in the
    lines in the original note.  You won't be able to do this as the
    lines contain control characters (they show up as backward question
    marks).  To get the lines to work EXTRACT the note and use an editor
    to strip off the text lines leaving just the DCL lines. Leave these
    remaining lines in a file and "@" the file from your login.com.
    If you still have problems give me a call.
    
    Other problems you might be having are that it requires a VT240
    (I haven't been able to get it to work on anything else), that
    the terminal must be identified as a VT200 in setup, and that the
    terminal must have soft characters enabled (check by entering
    SHOW TERM at the DCL prompt).
    
    							Bill

    It works on my VT220 also.
    
    -Dave

	How to make it working on a VT320?

	Bon vent.....From France

    I just got a VT3xx and it appears that the syntax for soft character
    sets is somewhat different due to the higher resolution of the VT3xx
    series.  Here's a set of DCL commands to set the prompt to a sailboat
    image on a vt3xx (you'll have to be in VT300 mode and the line will
    have to be set as using the SET TERM/DEV=VT300 probably).  IT only
    uses one line rather than two so the image is smaller than the vt2xx
    version.


    Bill
        
$ esc[0,7]   = 27
$ dcs[0,8]   = 144
$ st[0,8]    = 156
$ so[0,7]    = 14
$ si[0,7]    = 15
$ off        = "''esc'[0m" ! all term. attributes off 
$ bold       = "''esc'[1m" ! term. bold
$ write sys$output  "''dcs'1;3;1;10;1;2;20;0{1????????oG/????oGE@??/???L\\||~|''st'"
$ write sys$output  "''dcs'1;4;1;10;1;2;20;0{1C~o???????/[B?BKo????/{{{{{{\MC?''st'"
$ set prompt =  "''bold'''esc')1''so'#$''esc')1''si'''off' "

    See note 989 for a procedure to design your own prompt on a VT300.
    
    								Bill

> The one file you need is at MTBLUE::SYS$USER4:[PEASE_DAVE]CURSOR.COM.  

Can someone post this file?  or a new pointer to it?


Phil

>>> The one file you need is at MTBLUE::SYS$USER4:[PEASE_DAVE]CURSOR.COM.  

	Sorry, the current location is:

	mtblue::sys$prod3:[pease_dave]cursor.com

	No wild card access, just explicite copys

	Dave

P0q
 -
 \
 \
 P0q
 -
 \
 P0q
 !343?GLNN^yyyqqqQQQqph~~!4_-
 !347?_XF!10?~~!4F!6B!6E[[{{o?-
 !345?EF^m!4}!4MYYY~~Y{ssccc!4gG!7O__BKo!66?__??-
 !344?_OOGF!11?~~?B@BB@???!5@!5BMN^UNo!45?A]}]][[!4K!4GWWOOO~~ooo!8_???-
 !327?wWWW!7o_ww{Y
X!7wg!5oOO{RB{O!7_!16?Fw!44?_^!17?~~???!7@ABFFNNN^\}}}]O_?-
 !263?oo!62?_^!10?!4@Ew!6?!6@BB~B?~AAE!5CLLLHHHYYY]]Ys{woKBACCGGGOOO__!17?K[kKS!6Wow{}MNSZ!5Wg!6wgggo~~!4O!5_!16?@Ew!4?-
 !249?CK[{{!6woOO~~ooo!6_!49?_WCA@!15?_^!14?~??~!24?@BDLUe!4IKKKLTUY[[WW
W!4o???_OGF!10?_^!12?@FF^N^NB~B~^^]}}EEE!4LMMNZ^^^]^}}oo[B!4?-
 !251?_WF!9?~~!4?!8@BFFFMMM][GO_!30?_WCB!16?_OGE@!11?{KKK~??~!30?@ACGo!14?@FXbACCCGGOO___oKA@!21?~?~!25?@BFFM]m]M]}]kKKK[[{!5w__!4?-
 !248?K{v|[!6{WWww~Nww!7o!5_!10?BKo!20?_ogca``!10_!5?oGCC
AX!13Www~o_o^OO^o__!32?FW_!14?B[gGGGg!4OPPPQacccggOOO__!6?{CCC{~?~!32?@AKo!8?@?@@@BB@@ACCGOO_?-
 !250?Fx@@!8?~??~@B!5F!4N^^^V^~~~m}}{{]p___!18?BEw!6@B!5AEFDNN^m]]YY]]}y}qqqueeeaABB~B@@~BDD!6C!4G!4O!4_!19?~!16?~KMT!4Wggwww{[[kk{lllLLLT^}}s~gggnng~wo!5_!29
?B[_!21?BCGGo??-
 !247?_OGE@!7?{CC~??~!21?@@@B?@AKtHP`@@!4ACC!4G!4On_!17?_^!11?!6@BB~???~BBBD!5EI!5K!4[WWhh~}yy[[{wwwooo_?o^OWgGG!7Oo!4_B[_!11?!5@AA!6BDFF~???~III!6SW!5hqqQQS[Sss!5wooo__!6?{B!26?BKo!5?-
 !241?W{{}m|~{vtVTedmls~gggnww^!4WOOoo!5_!17?B{?@A
KOO_!12?@@@AACCCGG!4Oogf!21?~???~!27?!6@AABBBDDDJRRaAAAE!5CKHHHJJYS[wWOO__!18?~???~!17?!6@!5ABB!4DFFFJIJJNTdeEEMIIIKKK!6W!5o!5_`]!4?-
 !244?BLrFBB!5F@@@~???~BBB!6EKKLLLMZZzz}}Yy{swwwgoo_{IH!6OoRkgggW!5C!11AM]mMM]]^^]]Ss{{{!4wgggGGGOO~!4?~O!6_!37?@EW_!15?
@E[wwxhhhiqqsScgggoo__oN???No!44?@A[_!17?@@@BDGO_??-
 !243?_OKB!11?~???~!17?@??@@B@BFNN!4^j}QiKOO_!7?!5@!5A!5C!4G^!4O!4_!8?@@@~!5@~!4?~EEE!4KLLHX!5YQQqqu{scccggGGOOO!5_!6?_OM@!18?@EW_!6@BBB~@@B@@~!4?L~LL!6Yiq!4sw!7gOOOo!7_!13?_^!25?BEYcCGGOO__???-
 !223
?F|FKSWo__!8?KK~~}}!5y{[[sss{z???B{goo!6O!4_!22?@}__r{g!5G!10CAaQIMA}MiYqaa!4ABBAAAECsss{~!5?~!4_~wooo_!20?!7@BBBAAABBFEECFGO_!21?@EW_!6?~!5?~!5?~!15?!6@A!6BD!4EFFL!4MKS!4Wf_!29?BCW__??@@AACCGGOO__???-
 !223?o~l~J{[xxreIKWoo_??wF!4@BBB@!5?~!5?~@@@!7BEEE!
4FLMM]]}ms{{{[wWgwoo{F@F\`A!5BD!5FJLM\\]Uy}}^w~~^E\NYEKK[{ccCCGGHH~BBFFF}VV!4faab`__!41?@AKo!20?@]oouV^~K[[{{~s{{{[^^^IM!44?@ACGO_!27?@FXaACCGGOO__??@@AACCGGOOO__??-
 !217?_OGCADFMBCB@B??@ABEEC?@BBEKKWo__!5?WWw~s!4o~!4wgo!17?@@@BBFFFJJMNV^QEMp!19?oM@!12?
BFML^YUMMy~[C???~[[{!6woooppp``!6a!4c{{!5w!6o!4_!12?~!17?_ow{}~AABB~!5?~EEEK!5L!4XYYi!5qQScccgggGG!7OoOOO!6_!9?_WF!31?B{!7?@@AACCGGOO__???@@@AACCGGGOO___!5?-
 !209?_OOGCAA@!31?@BE}k{{ww~!5@~xxpP!4Ooo!8_!23?B{!13?_OGE@!22?oN~!5?~??@?@FDFFNNZNJNFFFB!4@!6B!
6FE!4Mkkl{|\yY[{!4wtrpptnn~l|~yQqaaaCCCHJJNRn!4?~!5?~!21?!6@AA!4BDDDFFF!4JNNVVVT\\mmkk{Z!5YQqq!4scckwwgg!4G!4O___!5?~AAEEEIISSSccC!6GPPRRUeiiqQaa!6CDDIIIKSWWOoo
 __???-
 !197?__OOGGCCAA@@!41?~?@@BBB~BB???~N!6F@@@!4ABBBDDL^~Vyyy}}kkss{[[[Wgwwo}@!8?_OKA@!
27?~?~!5?~!40?@@B@BBFFFB??B{E]~~m!7@!6BFM]]}u{knKK?~!5?~!56?BCGwG!8OP!6`bb!4BFEMMUVfjLMNK!7G!4OP`aacCGO__!6?@@ABAECCGGWOoo!8_ppp!4qs{{wwwWWW!8K!5E!5?-
 !184?___ooggCCAA@@!52?}@!6?~!5?~!25?@?@B@FFFNNN^L^]zA[_?_Ogcyxwoo!4_!25?Fw~!5?~!54?~_f!19_??@@BDFMN[{g
oO~cCCC!13G!8O!6_!28?_pM!16?!8@AAaadddeek{ww!5o!6WXXMMMNMkkkee!4Uujjjzzvn~||v^^^NNNFFFBBB@@@-
 !164?!7o!4w{{kim}u~z}~|~~~vv{{wgwoo___!47?B{!6?~!5?~!43?@F{E!12B!9A!5CGSW[ww{w{ww~~!5?~!7C!9G!4O!4_!28?_O~!4Oooo!4O!10GHHXXxxXX~AAABA~Y\\]]{[!6w!18W!4X!4Y[[[WW
WOo?__oooOww{y|z!6wW!5{k{}}u}uurr!6zxx!6|sss!4u~{{{yyqiiXXTTlkiYUULJJFEDBBA@@@?-
 !166?@@BAEDLHXXPp``@@!11B!5E!6F!5L!6M!5Y!6[ss!6w!8o!8_^!6g~!5?~O___!39?_o~!6o!12w{[!5{ww{k{!4[LLNNL~!5?~!18eaq!8rqq}aaCCCGWWoo_wgwwwk}{SIDF!4Mijn~jhhh!5dldddfee__oopPRQSSWW
~}}}^~~}{{n~VvbfFmm{{ww___!4o!4OWWWgggkkk{s!4vzzyzzzn|||vvv~}!4z!4|~|^^!5~|n^^NNDDD
 !6E!11IBa!4BA@@@?-
 !176?___`prrquS[WWWoowwwWWwWGgGwGgwg{kk{k{kk{k{!4k!6{!4[kkK}}vv!4f!5nNn!5fea~BB???~!7rqqq!7{ww}y}}}uuw{{kkS[{WkwgOgw[Zcbemy}uuu!4v!10~!6}uu}}!4^Z^^~
~~!5o~z~v~n!15~}}||zzvvn!6~}}{{wwtv~qp!4rv!4~!4xz~~~nnhhhxy!4~}{sssn!4~|{{{yu!5^~}~~zn!6^]}!5n~~}}}v^!6~nn^
 ^^~vvnnn~zvvVV^Zz~~n^\\@@`PPP``!4b!4BD!13CAA@@???_WCCA@@@!4?-
 !171?m~\XXx|x|w}wwywzwwzwopbffnn|\xxpp__!6?BDFJN!8^!5nlmnnffiYRVV^^vN^^!11~!5w!22
~z!10~^]]^]!4^[{w~!6x~!5n!4k!4n~!5}~~vvvuvvv!13^!6Z!16n!6l!17v!6]!5z!11n!6|!6v!6}]]]\!5^!5M!5N!4JZZZ^!5TVVZ!4IJJ!4LDDDF!5ED!4B@PO!4GCCB??_OGG!4C!7D!13C!4A@-
 !172?FHLVUfeEEN\\^\^\\nll~|z~z~zz~z~zz~~!4^!5njn!8~vvvEvuuu!4t!6~}!5yzz!13~||!8v!8]!15z!8~!8|!15
^!8}!7n!18~^^!8~n!9^!23N!4J!13NJJEEFF!4B!5@!5?!4_!7O!5G!20C!7G!21O!4GCA@???-
 !149?OO_ggceaae_OOSQiyXXhdddhxyyyqqrppp!6qttTZZRRRrrRTtt!4uvVVV!6^!4n!8~_!8~!6|\!7^!15]V!12n^^^!4Z!11V]]]!5M!8JNN!8F!7DLLLJJJ!6F!9ED!5B!5@`___!5O!11G!8C??!5_!5O!6G!10C!14A!9@??
-
 !151?!5C!4A@HHH!5IHHD!8CGGGCCAAA@@@!4A@@??CEAAACCGG!5H@!31?!50C!34A!4C!20G!4C!4A@@!27?@@@???-
 \
  
    

    Re .11
    
    Boy, I wish I'd said that.  
    
    
    
    Or am I the only one who can't read it ?
    
    (By the way, EEE!4LMMNZ is misspelled)
    
    R., who can't wait to see what it really says..

	re .11
		NICE!

	To see what this really says you need a graphics terminal,
	it worked on my VT125.  Extract the note to a file and later
	send the file to the terminal using the TYPE command.


	Al

    Re .13
    
    For those of us in the Spartan navy, any other way to enjoy it without
    graphics terminal ?
    
    R.

>    For those of us in the Spartan navy, any other way to enjoy it without
>    graphics terminal ?
    
If you're on a DECWINDOWS terminal window, EXTRACT to TT:
If you're on a VWS terminal window, you can do the same, but your window must
have REGIS support. Some do, some don't.

--RS

P.S. It's a nice picture!

    Thanks for the help.
    
    It required calling in a favor from a techie plebe in the Royal navy,
    but it was well worth it.
    
    It must be the time of year....
    
    R.
    

    WOW!!!!! 
    
    Any chance you got a picture of my little O'day 222????  
    
    For those of us with minimal techie grey cells, How'd ya do it??
    
    Thanks
    
    Fred
    

    RE: .17
    
>    For those of us with minimal techie grey cells, How'd ya do it??
    
    Easy.  I copied it from the CHEST::TERMINAL_ART conference.