T.R | Title | User | Personal Name | Date | Lines |
---|
2197.1 | What's the error? | TUXEDO::MAZZAFERRO | | Mon Mar 24 1997 16:11 | 6 |
| It would help to know what the error was and when it occurred. Was it
during the DCE Director Add Host portion or the client's DCEsetup
Remote Configuration portion?
Thanks.
Laura
|
2197.2 | should the registry have blank entries with a Remote Config | PEACHS::HAZZARD | | Mon Mar 24 1997 16:54 | 9 |
|
Good point, the problem is the DCE doesn't restart correctly after a
configuration. Missing hostname, address, ... I've asked the customer
for the exact error messages... However, should the Registry have blank
entries with a Remote Client Config?
Thanks
Powell
|
2197.3 | | PEACHS::HAZZARD | | Tue Mar 25 1997 08:42 | 13 |
| Here is an update from the customer:
Powell, there was no error. The message comes up that DCE has configured
sucessfully! Both the "Configure Host" and the "Remote Configuration"
indicated that there were no problems. The problem is in the "Remote
Configuration" from DCEsetup. It is not adding the configuration
information to the HostConfiguration subtree in the NT Registry. This option quit
working in 1.1C. Hope this helps.
Thanks
Powell
Digital Customer Support Center
|
2197.4 | | TUXEDO::MAZZAFERRO | | Tue Mar 25 1997 09:33 | 13 |
| Powell,
I wonder if the HostConfiguration information was put under a separate
key beneath the DCERuntimeServices key during the upgrade to denote
the new version number. Have him dump the contents of the CurrentVersion key
(not its subkey - HostConfiguration). There's a value in there which denotes the
version to be used. Also, take a look at the contents of the DCERuntimeServices
key itself; there should be a new key for the 1.1C kit - something like
V1.1.x - check beneath that for a new HostConfiguration key.
Is DCE functional on this system?
Laura
|
2197.5 | dump of everything from the registry | PEACHS::HAZZARD | | Tue Mar 25 1997 13:13 | 381 |
| Customer dump information:
Thanks
Powell
Powell, I'm including a dump of everything from the registry below the
Digital Equipment branch. It should include all the info fields engineering
asked about. Regarding the question if DCE is functional: the DCE autostart
runs when booted but only starts the RPC and CDSAdvertiser processes. If you
run DCEsetup it shows that all clients are disabled but that RPC and CDSAdv
are running. Also, the cell name is not displayed in the DCE Services Status
box. As far as functionality, none of the DCE commands that I've tried work;
this includes CDSCP, RPCCP, DTSCP commands as well as dce_login and klist.
------------------------------------------------------------------------------
Key Name: SOFTWARE\DigitalEquipmentCorporation
Class Name: <NO CLASS>
Last Write Time: 3/24/97 - 9:42 AM
Value 0
Name: VendorName
Type: REG_SZ
Data: Digital Equipment Corporation
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCEApplicationDevelopersKit
Class Name: <NO CLASS>
Last Write Time: 3/7/97 - 9:08 AM
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCEApplicationDevelopersKit\V1.1C
Class Name: <NO CLASS>
Last Write Time: 3/7/97 - 9:08 AM
Value 0
Name: Description
Type: REG_SZ
Data: Digital Equipment Corporation Distributed Computing Environment Developer's Kit
Value 1
Name: InstallDate
Type: REG_BINARY
Data:
00000000 10 fd 4e 6b 09 2b bc 01 - ..Nk.+..
Value 2
Name: InstallDateString
Type: REG_SZ
Data: 1997, 03, 07-09:08
Value 3
Name: MajorVersion
Type: REG_DWORD
Data: 0x1
Value 4
Name: MinorVersion
Type: REG_DWORD
Data: 0x1
Value 5
Name: PrivacyOption
Type: REG_DWORD
Data: 0
Value 6
Name: Revision
Type: REG_DWORD
Data: 0x43
Value 7
Name: SoftwareType
Type: REG_SZ
Data: tool
Value 8
Name: Title
Type: REG_SZ
Data: Digital DCE Application Developer's Kit for WNT
Value 9
Name: VersionKeyString
Type: REG_SZ
Data: 1.1C
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCERuntimeServices
Class Name: <NO CLASS>
Last Write Time: 3/7/97 - 8:56 AM
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCERuntimeServices\CurrentVersion
Class Name: <NO CLASS>
Last Write Time: 3/24/97 - 9:42 AM
Value 0
Name: Description
Type: REG_SZ
Data: Digital Equipment Corporation Distributed Computing Environment Runtime Services
Value 1
Name: InstallDate
Type: REG_BINARY
Data:
00000000 a0 c3 7a 02 6a 38 bc 01 - ..z.j8..
Value 2
Name: InstallDateString
Type: REG_SZ
Data: 1997, 03, 24-09:42
Value 3
Name: MajorVersion
Type: REG_DWORD
Data: 0x1
Value 4
Name: MinorVersion
Type: REG_DWORD
Data: 0x1
Value 5
Name: PrivacyOption
Type: REG_DWORD
Data: 0
Value 6
Name: Revision
Type: REG_DWORD
Data: 0x43
Value 7
Name: SoftwareType
Type: REG_SZ
Data: service
Value 8
Name: Title
Type: REG_SZ
Data: Digital DCE Runtime Services for WNT
Value 9
Name: VersionKeyString
Type: REG_SZ
Data: 1.1C
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCERuntimeServices\CurrentVersion\HostConfiguration
Class Name: DCE Host Configuration Data
Last Write Time: 3/24/97 - 10:42 AM
Value 0
Name: CanBroadcast
Type: REG_DWORD
Data: 0
Value 1
Name: CdsCachedSvrIp
Type: REG_SZ
Data:
Value 2
Name: CdsCachedSvrName
Type: REG_SZ
Data:
Value 3
Name: CdsReplicaChName
Type: REG_SZ
Data:
Value 4
Name: CellName
Type: REG_SZ
Data:
Value 5
Name: ConfigurationDone
Type: REG_DWORD
Data: 0x1
Value 6
Name: DCELanName
Type: REG_SZ
Data:
Value 7
Name: GdaDomainAddress
Type: REG_SZ
Data:
Value 8
Name: GdaDomainName
Type: REG_SZ
Data:
Value 9
Name: HostName
Type: REG_SZ
Data: quest
Value 10
Name: IsAutoStart
Type: REG_DWORD
Data: 0x1
Value 11
Name: IsAutoSynch
Type: REG_DWORD
Data: 0
Value 12
Name: IsCdsClient
Type: REG_DWORD
Data: 0
Value 13
Name: IsCdsMaster
Type: REG_DWORD
Data: 0
Value 14
Name: IsCdsReplica
Type: REG_DWORD
Data: 0
Value 15
Name: IsCdsSvr
Type: REG_DWORD
Data: 0
Value 16
Name: IsDtsClerk
Type: REG_DWORD
Data: 0
Value 17
Name: IsDtsGlobalSvr
Type: REG_DWORD
Data: 0
Value 18
Name: IsDtsSvr
Type: REG_DWORD
Data: 0
Value 19
Name: IsEnableIntLogin
Type: REG_DWORD
Data: 0
Value 20
Name: IsGdaClerk
Type: REG_DWORD
Data: 0
Value 21
Name: IsMultiLanCell
Type: REG_DWORD
Data: 0
Value 22
Name: IsNsiGateway
Type: REG_DWORD
Data: 0
Value 23
Name: IsRegisterX500
Type: REG_DWORD
Data: 0
Value 24
Name: IsSecClient
Type: REG_DWORD
Data: 0
Value 25
Name: IsSecMaster
Type: REG_DWORD
Data: 0
Value 26
Name: IsSecReplica
Type: REG_DWORD
Data: 0
Value 27
Name: IsSecSvr
Type: REG_DWORD
Data: 0
Value 28
Name: SecReplicaName
Type: REG_SZ
Data:
Value 29
Name: SecSvrIp
Type: REG_SZ
Data:
Value 30
Name: SecSvrName
Type: REG_SZ
Data:
Key Name: SOFTWARE\DigitalEquipmentCorporation\DCERuntimeServices\V1.1C
Class Name: <NO CLASS>
Last Write Time: 3/24/97 - 9:42 AM
Value 0
Name: Description
Type: REG_SZ
Data: Digital Equipment Corporation Distributed Computing Environment Runtime Services
Value 1
Name: InstallDate
Type: REG_BINARY
Data:
00000000 a0 c3 7a 02 6a 38 bc 01 - ..z.j8..
Value 2
Name: InstallDateString
Type: REG_SZ
Data: 1997, 03, 24-09:42
Value 3
Name: MajorVersion
Type: REG_DWORD
Data: 0x1
Value 4
Name: MinorVersion
Type: REG_DWORD
Data: 0x1
Value 5
Name: PrivacyOption
Type: REG_DWORD
Data: 0
Value 6
Name: Revision
Type: REG_DWORD
Data: 0x43
Value 7
Name: SoftwareType
Type: REG_SZ
Data: service
Value 8
Name: Title
Type: REG_SZ
Data: Digital DCE Runtime Services for WNT
Value 9
Name: VersionKeyString
Type: REG_SZ
Data: 1.1C
Key Name: SOFTWARE\DigitalEquipmentCorporation\eXcursionV2.0
Class Name: <NO CLASS>
Last Write Time: 11/16/95 - 6:43 AM
Value 0
Name: InstalledPath
Type: REG_SZ
Data: D:\WIN32APP\XCURSION\
Value 1
Name: InstalledVersion
Type: REG_SZ
Data: V2.1.309
Value 2
Name: RegisteredTo
Type: REG_SZ
Data: QUEST
Value 3
Name: SerialNumber
Type: REG_SZ
Data: XWNT-12001575
|
2197.6 | not just one pc | PEACHS::HAZZARD | | Tue Mar 25 1997 14:40 | 10 |
|
One other note:
this is not isolated to this one PC. We've tried this on four different
PCs running both NT4.0 and NT3.51.
Thanks
Powell
|
2197.7 | Integrated login... | PEACHS::SELBY | I am Pentium of Borg. Prepare to be approximated. | Tue Apr 29 1997 11:12 | 8 |
| I just wanted to add a status to this note.
It appears that the remote configuration will fail if the user
disables integrated login. Enabling integrated login will
allow the remote configuration to work fine.
Dale Selby
CSC Atlanta
|