[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference tuxedo::dce-products

Title:DCE Product Information
Notice:Kit Info - See 2.*-4.*
Moderator:TUXEDO::MAZZAFERRO
Created:Fri Jun 26 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:2269
Total number of notes:10003

2181.0. "DCE$DTSD won't start at boot time" by CSC32::J_MORTON (O8-OO-2b || ! 2b) Fri Mar 07 1997 12:13

Hi,                                                                            

DCE V1.3B, VMS V6.1.                                                           
                                                                                
During DCE$STARTUP, at system startup time, dtsd will not stay running. The PID
is returned, then a "...dtsd is not running message" (see below).
                                                                                
If they manually type the RUN/DETACH command (as displayed) after the system
starts, dtsd comes up/runs fine. 
                                                                                
TCP/IP (Multinet) is started before DCE.

There are no DCE$DTSD.OUT or DCE$DTSD.ERR files generated.  

I had the customer try this -- No luck:

	Edit SYS$MANAGER:DCE$SETUP.COM
	Locate the line               
        	$ Dts_Wait:           
	and insert the following command on the next line:
        	$ Wait 00:00:03                           

Any ideas or suggestions are welcome.

Thanks!

Jim

                                                                                
              ***  Starting all DCE daemons  ***                                
                                                                                
The DCE daemons on this system are now being started . . .                      
                                                                                
   Starting Remote Procedure Call Services daemon (DCE$RPCD) . . .              

%RUN-S-PROC_ID, identification of created process is 2C40005D                   
                                                                                
   Establishing security environment . . .                                      
                                                                                
   Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .              
%RUN-S-PROC_ID, identification of created process is 2C40005E                   
      Testing access to the security registry . . .                             
                                                                                
   Starting CDS Name Service Advertiser daemon (DCE$CDSADV) . . .               
%RUN-S-PROC_ID, identification of created process is 2C40005F                   
                                                                                
   Starting CDS Name Service Client daemon (DCE$CDSCLERK) . . .                 
%RUN-S-PROC_ID, identification of created process is 2C400060                   
      Testing access to the CDS Master Server . . .                             
                                                                                
   Starting Distributed Time Service daemon (DCE$DTSD) . . .                    
%RUN-S-PROC_ID, identification of created process is 2C400061                   
***  Error - Process DCE$DTSD is not running                                    
                                                                                
****************************    ERROR    ****************************           
***  An error occurred during DTS startup.  DTS may not operate                 
***  properly.  The failed comand is:                                           
***      $ Run /Detach Sys$System:DCE$DTSD.Exe . . .                            
                                                                                
     ***  DCE System Management Procedure Complete  ***                         
                                                                                
                                                                                
The customer did a DCE$STARTUP CONFIG MULTINET on that node, and specified
'rebuild' from the menu, the process failed again. He did a startup with
DCE$SETUP_DEBUG set to 1, and the messages near the point where DTS             
is started are...                                                               
                                                                                
----------------------------------                                              
TRACE -- Config_Init_Dts                                                        
  DTS = 1   Hex = 00000001  Octal = 00000000001                                 
  DTS_SERVER = 0   Hex = 00000000  Octal = 00000000000                          
TRACE -- Dce_Start_Dts                                                          
TRACE -- Run_Daemon(dtsd)                                                       
                                                                                
   Starting Distributed Time Service daemon (DCE$DTSD) . . .                    
DEBUG -- $ Run /Detach /Uic=[Dce$Server] -                                      
DEBUG --        /Proc="DCE$DTSD" -                                              
DEBUG --        /Out=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Out -                  
DEBUG --        /Err=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Err -                  
DEBUG --                                                                        
/Priv=(NoAll,Tmpmbx,Prmmbx,Netmbx,Sysprv,Sysnam,Cmkrnl,Cmexec,Op                
er,Log_Io,Sysgbl,Prmgbl) -                                                      
DEBUG --        /Prio=10 /Ast=100 /Buff=60000 /Enque=128 /Extent=8192 /File=50  
/                                                                               
Io_Buf=60 /Io_Dir=50/Maximum_work=2000 /Page=24000 /Queue=20/Work=512 -         
DEBUG --                                                                        
Sys$System:LoginOut.Exe/Input=Dce$Specific:[Var.Adm.Time]DCE$DTS                
D.Com;                                                                          
%RUN-S-PROC_ID, identification of created process is 2C4000E9                   
DEBUG -- Waiting(00:00:05) . . .                                                
TRACE -- Run_Update_Process(dtsd,0)                                             
DEBUG -- Temp_Pid,                                                              
***  Error - Process DCE$DTSD is not running                                    
                                                                                
****************************    ERROR    ****************************           
***  An error occurred during DTS startup.  DTS may not operate                 
***  properly.  The failed comand is:                                           
***      $ Run /Detach Sys$System:DCE$DTSD.Exe . . .                            
                                                                                
Do you wish to bypass the DTS startup and continue (YES/NO/?) [N]? Y            
TRACE -- Config_Init_Nsi_Agent                                                  
Press <RETURN> to continue . . .                                                
------------------------------------------
T.RTitleUserPersonal
Name		DateLines
2181.1DTSD accounting record or audit recordsSTAR::SWEENEYMon Mar 10 1997 08:4611
If accounting is enabled, what is the process exit status?

Any audit alarms generated when the process starts?

If there is no accounting or auditing information available, try modifying
DCE$SETUP to produce a process dump for DTSD before startin DCE.

Thanks,

Dave
2181.2more information - thanks, Dave!CSC32::J_MORTONO8-OO-2b || ! 2bThu Mar 13 1997 17:49117
    Hi Dave,
    
    Here is some additional information: alarm, accounting, dce$setup
    with run/dump - However, no .dmp file was created. Do you know what 
    directory it would have gone to?
    
    Thanks!
    
    Jim
    
Here is an alarm:
    
----------------------------------------------------------------
%%%%%%%%%%%  OPCOM  13-MAR-1997 15:24:11.47  %%%%%%%%%%%
Message from user AUDIT$SERVER on COSMOS
Security alarm (SECURITY) and security audit (SECURITY) on COSMOS, system id:
44
058
Auditable event:          Detached process login failure
Event time:               13-MAR-1997 15:24:11.13
PID:                      2C400267
Process name:             DCE$DTSD
Username:                 SYSTEM
Process owner:            [DCE$SERVER]
Image name:               MILES$DKA100:[SYS13.SYSCOMMON.][SYSEXE]LOGINOUT.EXE
Status:                   %RMS-E-CRE, ACP file create failed
--------------------------------------------------------------

And here is the accounting entry....

--------------------------------------------------------------

DETACHED Process Termination
----------------------------
Username:          SYSTEM            UIC:               [DCE$SERVER]
Account:           11465             Finish time:       13-MAR-1997 15:24:11.16
Process ID:        2C400267          Start time:        13-MAR-1997 15:24:10.63
Owner ID:                            Elapsed time:                0 00:00:00.53
Terminal name:                       Processor time:              0 00:00:00.27
Remote node addr:                    Priority:          10
Remote node name:                    Privilege <31-00>: 13148887
Remote ID:                           Privilege <63-32>: 00000000
Remote full name:
Queue entry:                         Final status code: 0001C00A
Queue name:
Job name:
Final status text: %RMS-E-CRE, ACP file create failed

Page faults:              139        Direct IO:                  4
Page fault reads:           3        Buffered IO:               12
Peak working set:         209        Volumes mounted:            0
Peak page file:          4638        Images executed:            1

----------------------------
    DCE$SETUP has been modified as follows:
    
$ If    (.Not. Proceed) Then    Goto    Run_NoImageErr
$ DebugEcho     "$ Run /Detach /Uic=[Dce$Server] -"
$ DebugEcho     "       /Dump -
$ DebugEcho     "       /Proc=""''Run_Procname'"" -"
$ DebugEcho     "       /Out=''RunOut' -"
$ DebugEcho     "       /Err=''RunErr' -"
$ DebugEcho     "       /Priv=(''Run_Privs') -"
$ DebugEcho     "       ''Run_Quotas' -"
$ DebugEcho     "       ''Run_Image'"
$!
$ Logit "$ Run /Detach /Uic=[Dce$Server] -"
$ Logit "       /Dump -
$ Logit "       /Proc=""''Run_Procname'"" -"
$ Logit "       /Out=''RunOut' -"
$ Logit "       /Err=''RunErr' -"
$ Logit "       /Priv=(''Run_Privs') -"
$ Logit "       ''Run_Quotas' -"
$ Logit "       ''Run_Image'"
$!
$ SetTrap       Run_RunErr
$ Run /Detach /Uic=[Dce$Server] -
        /Dump -
        /Proc="''Run_Procname'" -
        /Out='RunOut /Err='RunErr -
        /Priv=('Run_Privs) -
        'Run_Quotas -
        'Run_Image
$ ResetTrap
-------------------------------------

Here is the section of the DCE$SETUP.LOG file... 

--------------------------------------
13-MAR-1997 16:38:07.30 :     Starting Distributed Time Service daemon
(DCE$DTS$
13-MAR-1997 16:38:07.38 :  $ Run /Detach /Uic=[Dce$Server] -
13-MAR-1997 16:38:07.39 :       /Dump -
13-MAR-1997 16:38:07.40 :       /Proc="DCE$DTSD" -
13-MAR-1997 16:38:07.41 :       /Out=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Out -
13-MAR-1997 16:38:07.43 :       /Err=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Err -
13-MAR-1997 16:38:07.44 :      
/Priv=(NoAll,Tmpmbx,Prmmbx,Netmbx,Sysprv,Sysnam$
13-MAR-1997 16:38:07.45 :       /Prio=10 /Ast=100 /Buff=60000 /Enque=128
/Exten$
13-MAR-1997 16:38:07.48 :      
Sys$System:LoginOut.Exe/Input=Dce$Specific:[Var$
13-MAR-1997 16:38:13.68 :  ***  Error - Process DCE$DTSD is not running
13-MAR-1997 16:38:13.89 :
13-MAR-1997 16:38:13.91 :  ********************    ERROR   
*******************$
13-MAR-1997 16:38:13.92 :  ***  An error occurred during DTS startup.  Command:
13-MAR-1997 16:38:13.93 :  ***      $ Run /Detach Sys$System:DCE$DTSD.Exe . . .
13-MAR-1997 16:38:49.47 :  CONFIGURE:  ***  Operation completed  ***
13-MAR-1997 16:38:50.11 :  $ Dce$Kdestroy
13-MAR-1997 16:38:52.03 :
13-MAR-1997 16:38:52.04 : 
****************************************************$
13-MAR-1997 16:38:52.05 :  ***        Dce$Setup: Processing Completed       
**$
13-MAR-1997 16:38:52.06 : 
****************************************************$
2181.3TUXEDO::MAZZAFERROFri Mar 14 1997 12:165
Did you check to see if either of the DCE/DTS log files were created:

	Dce$Specific:[Var.Adm.Time]DCE$DTSD.Out
or 	Dce$Specific:[Var.Adm.Time]DCE$DTSD.Err
2181.4No, these file were not created...CSC32::J_MORTONO8-OO-2b || ! 2bMon Mar 17 1997 11:591
2181.5a bit more info...CSC32::J_MORTONO8-OO-2b || ! 2bMon Mar 17 1997 16:29277
Hi,
    
    Here's some additional information (see below).
    
    Also, a correction to .0: DTSD will NOT start even after the system is
    up.
    
    I can dialin again tomorrow. I'm open to suggestions as to what else
    I might look at.
    
    Thanks,
    
    Jim
    
$ @dtsd
%XQP, Thread #0, FIB contents:
     00010001 00000000 02F70000 0000000E 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00010001 00000000 02F70000 0000000E 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (759,14,0): Access requested: 00000004, Status:
 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (759,14,0)
%XQP, Thread #0, Directory scan for: DTSD.COM;0, Status: 00000001
%XQP, Thread #0, Alternate access requested: 00000001, Required: 0
%XQP, Thread #0, File protection (2942,352,0): Access requested: 00000005, Statu
s: 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read attributes: Access mode DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: Access mode DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: Journal flags DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: RU active DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: Statistics block DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: Find ACE by type DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: Record attributes DTSD.COM;4 (2942,352,0)
%XQP, Thread #0, Read attributes: User file characteristics DTSD.COM;4 (2942,352
,0)
%XQP, Thread #0, Access DTSD.COM;4 (2942,352,0) Status: 00000001
$ Run /Detach /Uic=[Dce$Server] -
        /dump -
        /Proc="DCE$DTSD" -
        /Out=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Out -
        /Err=Dce$Specific:[Var.Adm.Time]DCE$DTSD.Err -
        /Priv=(NoAll,Tmpmbx,Prmmbx,Netmbx,Sysprv,Sysnam,Cmkrnl,Cmexec,Oper,Log_I
o,Sysgbl,Prmgbl) -
        /Prio=10 /Ast=100 /Buff=60000 /Enque=128 -
        /Extent=4096 /File=30 /Io_Buf=60 /Io_Dir=50 -
        /Maximum_work=2000 /Page=24000 /Queue=20 /Work=512 -
        Sys$System:LoginOut.Exe/Input=Dce$Specific:[Var.Adm.Time]dce$dtsd.com
%XQP, Thread #0, FIB contents:
     FF010841 00000000 19F60000 00000004 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     FF010841 00000000 19F60000 00000004 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000001 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (6646,4,0): Access requested: 00000004, Status:
 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (6646,4,0)
%XQP, Thread #0, Directory scan for: RUNDET.EXE;0, Status: 00000000
%XQP, Thread #0, Access  (0,0,0) Status: 00000910
%XQP, Thread #0, FIB contents:
     FF010841 00000000 02D30000 000000CA 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     FF010841 00000000 02D30000 000000CA 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000001 00000000 00000001
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (723,202,0): Access requested: 00000004, Status
: 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (723,202,0)
%XQP, Thread #0, Directory scan for: RUNDET.EXE;0, Status: 00000001
%XQP, Thread #0, Alternate access requested: 00000001, Required: 0
%XQP, Thread #0, File protection (1085,2,0): Access requested: 00000005, Status:
 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read attributes: Access mode RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Owner UIC RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Header 1 accessibility RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: File protection RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: File access level RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: ACL length RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Read ACL RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Access mode RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Journal flags RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: RU active RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Statistics block RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Find ACE by type RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: Record attributes RUNDET.EXE;1 (1085,2,0)
%XQP, Thread #0, Read attributes: User file characteristics RUNDET.EXE;1 (1085,2
,0)
%XQP, Thread #0, Access RUNDET.EXE;1 (1085,2,0) Status: 00000001
%XQP, Thread #0, FIB contents:
     00000000 00000000 19F60000 00000004 00000000 00000100 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00000000 00000000 19F60000 00000004 00000000 00000100 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (6646,4,0): Access requested: 00000004, Status:
 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (6646,4,0)
%XQP, Thread #0, Directory scan for: LOGINOUT.EXE;0, Status: 00000000
%XQP, Thread #0, Lookup  (0,0,0) Status: 00000910
%XQP, Thread #0, FIB contents:
     00000000 00000000 02D30000 000000CA 00000000 00000100 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00000000 00000000 02D30000 000000CA 00000000 00000100 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (723,202,0): Access requested: 00000004, Status
: 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (723,202,0)
%XQP, Thread #0, Directory scan for: LOGINOUT.EXE;0, Status: 00000001
%XQP, Thread #0, Lookup  (1066,2,0) Status: 00000001
%XQP, Thread #0, FIB contents:
     00040000 00000000 318D0000 00000003 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 01010000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00040000 00000000 318D0000 00000003 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 01010000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001
, PrvUsd: 00000000
%XQP, Thread #0, File protection (12685,3,0): Access requested: 00000004, Status
: 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read only directory access (12685,3,0)
%XQP, Thread #0, Directory scan for: RIGHTSLIST.DAT;0, Status: 00000001
%XQP, Thread #0, File protection (1424,2,0): Access requested: 00000001, Status:
 00000001, PrvUsd: 00000000
%XQP, Thread #0, Read attributes: Access mode RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: Access mode RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: Journal flags RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: RU active RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: Statistics block RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: Find ACE by type RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: Record attributes RIGHTSLIST.DAT;1 (1424,2,0)
%XQP, Thread #0, Read attributes: User file characteristics
RIGHTSLIST.DAT;1 (14
24,2,0)
%XQP, Thread #0, Access RIGHTSLIST.DAT;1 (1424,2,0) Status: 00000001
%RUN-S-PROC_ID, identification of created process is 2C400325
%XQP, Thread #0, FIB contents:
     00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00000000 00020590 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00010000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Deaccess (1424,2,0) Reads: 5, Writes: 0, Status: 00000001
%XQP, Thread #0, FIB contents:
     00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00000000 0002043D 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Deaccess (1085,2,0) Reads: 6, Writes: 0, Status: 00000001
$ exit
%XQP, Thread #0, FIB contents:
     00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, FIB contents:
     00000000 01600B7E 00000000 00000000 00000000 00000000 00000000 00000000
     00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000
     00000000 00000000 00000000 00000000
%XQP, Thread #0, Deaccess (2942,352,0) Reads: 1, Writes: 0, Status: 00000001
$
%%%%%%%%%%%  OPCOM  17-MAR-1997 13:27:30.41  %%%%%%%%%%%
Message from user AUDIT$SERVER on COSMOS
Security alarm (SECURITY) and security audit (SECURITY) on COSMOS, system
id: 44
058
Auditable event:          Detached process login failure
Event time:               17-MAR-1997 13:27:30.03
PID:                      2C400325
Process name:             DCE$DTSD
Username:                 FIELD
Process owner:            [DCE$SERVER]
Image name:               MILES$DKA100:[SYS13.SYSCOMMON.][SYSEXE]LOGINOUT.EXE
Status:                   %RMS-E-CRE, ACP file create failed

========================================

        Image Identification Information

                image name: "DCE$DTSD"
                image file identification: "DCE V1.3-951008"
                link date/time:  8-OCT-1995 08:45:20.32
                linker identification: "05-13"

        Image Identification Information

                image name: "DCE$SECD"
                image file identification: "DCE V1.3-951008"
                link date/time:  8-OCT-1995 08:45:43.65
                linker identification: "05-13"


               DCE System Management Main Menu
                   DCE V1.3B for OpenVMS VAX


$ dir /prot sys$system:righ*/date

Directory SYS$COMMON:[SYSEXE]

>>>RIGHTSLIST.DAT;3     26-FEB-1996 14:50:35.92  (RWED,RWED,R,)
	Modified this to be w:re - No change.

RIGHTSLIST.DATA;2    11-JAN-1993 13:58:54.31  (RWE,RWE,,)
RIGHTSLIST_OLDHIG.DAT;1
                     12-DEC-1995 10:23:44.69  (RWED,RWED,RE,RE)

$ dir sys$system:loginout.exe/prot

Directory SYS$COMMON:[SYSEXE]

LOGINOUT.EXE;1       (RWED,RWED,RWED,RE)

Total of 1 file.

UAF> sho dce$server

Username: DCE$SERVER                       Owner:  DCE$SERVER
Account:  11456                            UIC:    [363,363] ([DCE$SERVER])
CLI:      DCL                              Tables:
Default:  SYS$COMMON:[DCE$SERVER]
LGICMD:   SYS$SYSTEM:DCE$LOGIN.COM
Flags:  DisCtlY DefCLI LockPwd Restricted DisUser DisNewMail DisMail Captive
              DisImage
Primary days:   Mon Tue Wed Thu Fri Sat Sun
Secondary days:
Primary   000000000011111111112222  Secondary 000000000011111111112222
Day Hours 012345678901234567890123  Day Hours 012345678901234567890123
Network:  -----  No access  ------            -----  No access  ------
Batch:    -----  No access  ------            -----  No access  ------
Local:    -----  No access  ------            -----  No access  ------
Dialup:   -----  No access  ------            -----  No access  ------
Remote:   -----  No access  ------            -----  No access  ------
Expiration:            (none)    Pwdminimum:  6   Login Fails:     0
Pwdlifetime:        180 00:00    Pwdchange:      (pre-expired)
Last Login:            (none) (interactive),            (none) (non-interactive)
Maxjobs:         0  Fillm:       100  Bytlm:        50000
Maxacctjobs:     0  Shrfillm:      0  Pbytlm:           0
Maxdetach:       0  BIOlm:       200  JTquota:      32768
Prclm:          20  DIOlm:       200  WSdef:         1024
Prio:            4  ASTlm:       200  WSquo:         2048
Queprio:         0  TQElm:        10  WSextent:     16384
CPU:        (none)  Enqlm:      2000  Pgflquo:      50000
Authorized Privileges:
  DETACH    NETMBX    SYSPRV    TMPMBX
Default Privileges:
  NETMBX    TMPMBX
Identifier                         Value           Attributes
  NET$DECLAREOBJECT                %X91F50005
UAF>
2181.6Try to run DTSD interactivelySTAR::SWEENEYMon Mar 17 1997 17:2512
What's the protection on sys$system:dce$login.com?

Try running the  Dce$Specific:[Var.Adm.Time]dce$dtsd.com procedure interactively
and settting the output the the Dce$Specific:[Var.Adm.Time] directory.  

The RUN/DETACH is creating a separate process, we need to capture the SET watch
information for the process created, PID 2C400325, rather than the creating
process, DCE$SETUP.

Thanks,

Dave
2181.7more info.CSC32::J_MORTONO8-OO-2b || ! 2bTue Mar 18 1997 16:2140
    Hi Dave,
    
    I think it works interactively %-}
    
    fyi,
    
    Jim
    
>What's the protection on sys$system:dce$login.com?
$ dir/sec sys$system:dce$login.com

Directory SYS$COMMON:[SYSEXE]

DCE$LOGIN.COM;1      [A11465,SYSTEM]       (RWED,,,)

Total of 1 file.

UAF> sho system/br
       Owner         Username           UIC       Account  Privs Pri Directory

SYSTEM - SYSTEM MGR. SYSTEM            [1,4]      11465    All     4 SYS$COMMON:[SYSMGR]

>Try running the  Dce$Specific:[Var.Adm.Time]dce$dtsd.com procedure interactively
>and settting the output the the Dce$Specific:[Var.Adm.Time] directory.

$ @Dce$Specific:[Var.Adm.Time]dce$dtsd.com/out=Dce$Specific:[Var.Adm.Time]x.x
COSMOS::FIELD 16:03:30 DCE$DTSD  CPU=00:00:13.01 PF=10177 IO=545 MEM=2339
 Interrupt

$ dir Dce$Specific:[Var.Adm.Time]x.x

Directory DCE$SPECIFIC:[VAR.ADM.TIME]

X.X;1

Total of 1 file.
$ type DCE$SPECIFIC:[VAR.ADM.TIME]X.X;1
$       Define/NoLog/Process DCE$FCC_DEBUG 1
$       dce$$dtsd := $Sys$System:DCE$DTSD.Exe
$       dce$$dtsd
2181.8brainstorming welcome ;-)CSC32::J_MORTONO8-OO-2b || ! 2bFri Mar 21 1997 10:488
    Hi,
    
    Any ideas as to why dtsd won't start when a RUN/DETACH is done
    would be greatly appreciated.
    
    Thanks,
    
    Jim
2181.9check quotas, priv, etc.FOUNDR::WOODRUFFFri Mar 21 1997 13:588
    
>    Any ideas as to why dtsd won't start when a RUN/DETACH is done
>    would be greatly appreciated.

	check to make sure that the detached process has enough quotas, etc.
	(all of the VMS stuff) and privileges as well. look at the dcesetup.com
	to check the needed settings.
2181.10SolutionCSC32::J_MORTONO8-OO-2b || ! 2bFri Mar 21 1997 14:296
    It turns out that diskquotas were enabled and the DCE$SERVER
    account was over quota.
    
    fyi,
    
    Jim