Conference turris::debug

1863.0. "debug v6.1 on 5.5-2" by EVTAI1::ROCHE () Thu May 22 1997 04:40

could anyone help me with the following problem
thanks

Flavie


a customer did installed DBG061  on VMS 5.5-2H4 , DECWINDOWS 1.2
he runs an ADA program and gots

POM41_YMR> run counters
X Toolkit Warning: Urm__CW_ConvertValue: Couldn't convert identifier 'cnt_src_br
owser_pbident' - MrmNOT_FOUND
X Toolkit Warning: Urm__CW_FixupCallback: Callback routine 'help_on_context_cb'
not registered - MrmNOT_FOUND
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
003B84A8, PSL=03C00004
%DEBUG-E-DBGERR, internal debugger coding error.
-DEBUG-I-LOGFILEIS, the error log is in file DEBUG.LOG
-SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC
=003B84A8, PSL=03C00004
%DEBUG-I-INITIAL, language is C, module set to COUNTERS
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000008, PC=
0037E9C4, PSL=03C00004
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
00389A94, PSL=03C00004
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
00372267, PSL=03C00004
...
...
program runs 
...
...
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000008, PC=
0037E9C4, PSL=03C00004
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
00389A94, PSL=03C00004
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
00372267, PSL=03C00004

2 empty windows are displayed with the message :
Copyright 1992, 1993 Digital Equipment Corporation
VMS Debugger: Error

after CTRL-Y, he gets an empty DBGERR.LOG est cr��.

Pour information :

$ sh log *db*

(LNM$PROCESS_TABLE)

(LNM$JOB_80FEF2C0)

(LNM$GROUP_000026)

(LNM$SYSTEM_TABLE)

  "ACP$BADBLOCK_MBX" = "MBA4:"
  "DBG$HA_DEFAULTS" = "SYS$LOGIN:DBG$HA_DEFAULTS.DAT"
        = "SYS$LIBRARY:DBG$HA_DEFAULTS.DAT"
  "DBG$INPUT" = "SYS$INPUT:"
  "DBG$OUTPUT" = "SYS$OUTPUT:"
  "RDBVMS$DEMO" = "SYS$COMMON:[SYSHLP.EXAMPLES.RDBVMS]"

(DECW$LOGICAL_NAMES)

  "DECW$XLIBERRDB" = "SYS$MESSAGE:DECW$XLIBERRDB.DAT"

the installation trace follows

$ @sys$update:vmsinstal


        VAX/VMS Software Product Installation Procedure V5.5-2H4


It is 22-APR-1997 at 10:11.

Enter a question mark (?) at any time for help.

%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
        AIL$142_0213
        DECW$MWM
        YMR
        DECW$TE_0134
        _FTA3:
        VUE$YMR_3
        VUE$YMR_4
        _FTA6:
        _FTA8:
        _FTA9:
        _FTA10:
        _FTA11:
        _FTA12:
        _FTA13:
        _FTA14:
        _FTA15:
        _FTA16:
        _FTA17:
        _FTA18:
* Do you want to continue anyway [NO]? y
* Are you satisfied with the backup of your system disk [YES]?
* Where will the distribution volumes be mounted: d_ymr:[000000]

Enter the products to be processed from the first distribution volume set.
* Products: DBG061
* Enter installation options you wish to use (none):

The following products will be processed:

  DBG V6.1


        Beginning installation of DBG V6.1 at 10:12

%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

      This kit installs Debug version V6.1.  Note that it requires
      VMS V5.5 or later.  If the debugger's graphical user interface or
      the Heap Analyzer feature of the debugger is to be used, it will
      require Motif V1.1 or later.

     *********************************************************************
     *                                                                   *
     *                                                                   *
     *  THIS INSTALLATION WILL REPLACE YOUR CURRENT VMS SYSTEM DEBUGGER! *
     *                                                                   *
     *                                                                   *
     *********************************************************************

      You should insure that you have saved the current version of the
      system debugger.  Refer to the file DBG061.INSTALLATION_NOTES
      for more details.


      The name of the V6.1 Debug startup command file is:

                SYS$STARTUP:DEBUG$STARTUP.COM

      You should add the following line to your system startup procedure:

                $ @SYS$STARTUP:DEBUG$STARTUP.COM

* Do you want to run the IVP after the installation [YES]?
* Do you want to run the interactive DEC Windows Motif IVP? [NO]: y
* Do you want to purge files replaced by this installation [YES]?
%DBG-I-DONEASK, No further questions will be asked during this installation.
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
%VMSINSTAL-I-RESTORE, Restoring product save set C ...
%DBG-I-ENDRESTORE, All Debugger savesets have been restored.
%DBG-I-LINKDONE, DEBUGSHR has been linked.
%DBG-I-LINKDONE, DEBUG has been linked.
%DBG-I-LINKDONE, TRACE has been linked.
%DBG-I-LINKDONE, HA_MAIN has been linked.
%DBG-I-LINKDONE, HA_KERNEL has been linked.
%DBG-I-LINKDONE, DEBUGUISHR has been linked.
%DBG-I-CLEANUP, Cleanup has been performed.
%DBG-I-PROHELP, Providing Debugger Help files...
%DBG-I-PRORES, Providing Resource file for Debugger visuals...
%DBG-I-PROMSG, Providing Debugger message image...
%DBG-I-PROMSG, Providing Debugger startup files ...
%DBG-I-PROEXE, Providing Debugger files...
%DBG-I-PROIVP, Providing test files for IVP...
*******************************************************************************
*                                                                             *
*                                                                             *
*  The Debugger IVP has been moved to the SYS$TEST directory.  To run         *
*                                                                             *
*  the IVP after installation, enter @SYS$TEST:DBG$IVP.COM for the character  *
*                                                                             *
*  cell IVP.  If DECWindows Motif has been installed on your system, enter    *
*                                                                             *
*  @SYS$TEST:DBG$DW$IVP.COM for the interactive DECWindows Motif IVP.         *
*                                                                             *
*                                                                             *
*******************************************************************************
******************************************************************************
*
*
*   Unable to perform automatic mail notification of installation status.
*
*   Please send mail to 2326::DEBUG with the status of the installation.
*
*
******************************************************************************
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
*******************************************************************************
*                                                                             *
*            Beginning the Debug V6.1 Verification Procedure                  *
*                                                                             *
*******************************************************************************
*******************************************************************************
*                                                                             *
*                   Debug verification procedure successful                   *
*                                                                             *
*******************************************************************************
*******************************************************************************
*                                                                             *
*            Beginning the Debug V6.1 Verification Procedure                  *
*              using the Motif Windows User Interface                         *
*                                                                             *
*******************************************************************************
%DBG-I-IVP, The IVP will display on _WSA1:

    When the windows come up, do the following:

    -  Type "RUN/HEAP_ANALYZE IVP_IMAGE" at the DBG> prompt.
        * A watch cursor should appear and then the Heap Analyzer (HA) Window
          should appear on top of the Main Window.
    -  Move the HA Window so it no longer occludes the Main Window.
    -  Press the "Start" button in the middle, lower left of the HA Window.
        * The HA Window should be updated.
        * "Source line not available" messages should appear in the Source View.
        * The "%DEBUG-W-UNAOPNSRC" warning should appear in the message area.
    -  Type "SET SOURCE/LATEST SYS$TEST" at the DBG> prompt.
        * Source should be displayed in the Source View.
    -  Press the "Go" button in the middle of the Main Window.
        * The HA Window should be updated.
        * "%DEBUG-W-SCRNOSRCLIN" and "%DEBUG-I-EXITSTATUS" messages should
          appear in the Main Window.
        * The output of the program should appear in the DECterm.
    -  Pull down the FILE menu in the Main Window and select "Exit debugger".
        * The Exit Confirmation Dialog Box should appear.
    -  Press the "Yes" button in the Exit Confirmation Dialog Box.
        * The debugger should exit.

X Toolkit Warning: Urm__CW_ConvertValue: Couldn't convert identifier 'cnt_src_br
owser_pbident' - MrmNOT_FOUND
X Toolkit Warning: Urm__CW_FixupCallback: Callback routine 'help_on_context_cb'
not registered - MrmNOT_FOUND
%DEBUG-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC=
003B84A8, PSL=03C00004
%DEBUG-E-DBGERR, internal debugger coding error.
-DEBUG-I-LOGFILEIS, the error log is in file DEBUG.LOG
-SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000004, PC
=003B84A8, PSL=03C00004
%DEBUG-F-NPROMPT, the debugger could not properly setup the state to accept inpu
t.
-DEBUG-F-FATALSTATUS, a fatal condition was detected by the debugger.
%DEBUG-F-INITERR, an error has occurred during debugger initialization, unable t
o continue this session.
%DBG-S-IVP, The IVP has completed.

        Installation of DBG V6.1 completed at 10:15

Enter the products to be processed from the next distribution volume set.
* Products:  Exit

        VMSINSTAL procedure done at 10:18

One (namely, me) asks how a customer got this kit, since it was only 
ever publicized as "internal only" however...



try the following:  

$ COPY DECW$SYSTEM_DEFAULTS:VMSDEBUG.DAT DECW$USER_DEFAULTS:VMSDEBUG.DAT


What happens if he trys to invoke the characeter cell interface?  Does
that come up ok?

Make sure there are new versions of VMSDEBUGUIL.UID and VMSDEBUGCUSTUIL.UID
are located in SYS$LIBRARY.

Mary

>>> One (namely, me) asks how a customer got this kit, since it was only 
>>> ever publicized as "internal only" however...

one (not me) ... I will tell you as soon as I know


$ COPY DECW$SYSTEM_DEFAULTS:VMSDEBUG.DAT DECW$USER_DEFAULTS:VMSDEBUG.DAT

gives the same results



>>> What happens if he trys to invoke the characeter cell interface?  Does
>>> that come up ok?

         OpenVMS VAX DEBUG Version T6.2-004

%DEBUG-I-INITIAL, language is C, module set to TEST

DBG> go
...
program execution
...
%DEBUG-I-EXITSTATUS, is '%SYSTEM-S-NORMAL, normal successful completion'
DBG>  Exit
POM41_YMR>

>>> Make sure there are new versions of VMSDEBUGUIL.UID and VMSDEBUGCUSTUIL.UID
>>> are located in SYS$LIBRARY.

SYS$LIBRARY:VMSDEBUGUIL.UID & SYS$LIBRARY:VMSDEBUGCUSTUIL.UID are the same as
in the kit DBG061

Flavie