| Title: | Euro-PC Support Conference |
| Notice: | Stop your whinning and get back to work! |
| Moderator: | SUTRA::BATS |
| Created: | Mon Jun 12 1989 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3826 |
| Total number of notes: | 12603 |
Hi, The customer has several new Celebris GL 6200 i2 - FR-B96WW-EG. (Bios GL 6200 DP 1.01) Even after several weeks of work all dispLay CMOS error after power up - the battery doesn't work. Save setup option works until next power off. In all four PC there is the same error - is it known problem ? I want to order new batteries but there are no this type of Celebris GL on QRL. Could somebody provide me a correct part number for the battery ? Thanks, Jarek Parlinski, MCS, Warsaw
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3816.1 | Clean battery | PCBUOA::GKELLEY | Tue May 20 1997 19:00 | 7 | |
We've seen some problems with the battery. Clean both the battery and
the contacts and see if that fixes the problem. If you need a new
battery, use the same one that's in the Venturis FX.
regards,
glen kelley
| |||||
| 3816.2 | JGO::GERRITSEN | [email protected] | Wed May 21 1997 12:58 | 16 | |
This could also be a revision problem.
Just watch at the left side of the battery if the diode D43 is
installed. If so the battery problem can occur during power off/on.
Correction: Replace Diode D43 by an zero ohm jumper.
Hope this solve your problem.
Please let me know what the fix is for your problem.
Regards,
Ray
| |||||
| 3816.3 | follow up on GL 6200 battery failure | PCBUOA::PENG | Thu May 22 1997 19:02 | 6 | |
Did the cleaning battery help with your problem? This probably has
some thing to do with system CMOS setup or BIOS, if you log a call
with support,we will have someone look into this problem.
regards,
Judy
| |||||