| Title: | Euro-PC Support Conference |
| Notice: | Stop your whinning and get back to work! |
| Moderator: | SUTRA::BATS |
| Created: | Mon Jun 12 1989 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3826 |
| Total number of notes: | 12603 |
I have a Celebris GL5166 with a 17inch monitor (pcxpv-ud). It also has
a US Robotics modem and an Adaptec PCI Scsi card.
Im using the Digital Power Management software that came with the
machine. Running 95.
When the machine goes to sleep very often I cannot get it to come back
up again (without powering it down).
Any ideas.
It doesnt seem to matter whether or not the modem is being used.
Regards
Nigel
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3812.1 | Have you checked the monitor? | PCBUOA::GKELLEY | Thu May 01 1997 22:01 | 8 | |
Have you loaded the latest BIOS from the PCBU WEB page? We haven't
really heard of many problem with power management on the GL, but have
had some problems with monitors that are not completely DDC2b
compliant. Check to see if its your monitor that may not be waking up
rather than the system.
regards,
glen kelley
| |||||
| 3812.2 | monitor problem with Celebris GL5xxx | PCBUOA::PENG | Thu May 22 1997 20:40 | 9 | |
I do not see pcxpv-ud monitor in our supported monitor list. Do you
mean pcxbv-ud? The pcxbv-ud is a northern variant monitor,it supports
VESA and DPMS compliant systems. Do you have a right timer set in CMOS
setup? If the problem still bothering you, please log a call to
support. Also our support web has all supported monitor list,the web
page is : http://pcbu.ako.dec.com/
regards,
Judy
| |||||