[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | HSZ40 Product Conference |
|
| Moderator: | SSDEVO::EDMONDS |
|
| Created: | Mon Apr 11 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 902 |
| Total number of notes: | 3319 |
Well, I tried to upgrade my HSZ40 from v2.7 to v3.0 and managed to
screw up the firmware card to the point where the HSZ won't boot. I
followed all the instructions in the User guide and the kermit file
xfer went without a hitch.
Adds new meaning to the old adage, "don't try this at home kids" :}
So, what are my options at this point? I see three:
o Stick the card into a PC with software that knows how to write
PCMCIA cards. This would also mean getting a valid v3.0 image,
which is (I think) the problem I'm having above.
o Is there some kind of "dual-redundant" controller copy I can invoke?
o Procure a new PCMCIA card with the correct firmware on it.
So as for option three, can someone point me at the right part # or the
contact for software maintenance upgrades?
For option two, is there a "run command" that will let me copy from one
conroller to another?
And finally for option two, is there a good site to grab firmware images from
and does anyone here have experience with writing this image to the PCMCIA
card?
Thanks a bunch!
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 883.1 | | SSDEVO::T_GONZALES | | Wed May 21 1997 10:39 | 5 |
| part number for 3.0-2z is BG-R22T0-0A rev A01 for field service order
for customer order QA-2YJAD-HS.
Your best option is to order another card
|
| 883.2 | | UTOPIE::OETTL | hide bug until worst time | Thu May 22 1997 12:10 | 13 |
| > part number for 3.0-2z is BG-R22T0-0A rev A01 for field service order
>
> for customer order QA-2YJAD-HS.
>
> Your best option is to order another card
According to our logistics, part# BG-R22T0-0A (or the V3.1 version) is no more
orderable through logistics. We were told to order them from SSB.
So we signed an internal MDDS contract to have one handy in case of a failure...
�tzi
|
| 883.3 | it should work! | TINCUP::RIDGE | I don't know where I'm at, but I'm nearly there! | Fri May 23 1997 17:45 | 11 |
| Ahhhhh
Well, as of yesterday it was set up per .2 for the US.... and supposedly
for the world!
Its nice that the GSO organization ...isn't GLOBAL in how it manages
parts/policy. You may wish to escalate this up through Europe logistics
back to Andover, and see if the parties can smooth this out for the next
lad who attempts to order it!.
generidge
mcs-pse
|