| Title: | HSZ40 Product Conference |
| Moderator: | SSDEVO::EDMONDS |
| Created: | Mon Apr 11 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 902 |
| Total number of notes: | 3319 |
Hi Guys,
Following the c_swap procedure written on servicing your
Storagework subsystem pag.77,we discover a bug during the
set this preferred_id on the good controller,the command
respond : oparation not available at this time,and the prefer
doesn't take effect.
The big problem is that if you proceed with operation the next
step is to restart other controller and after the command the faulty
controller restart and set unavailable the units!!!!!
Controller hsz40-c hsof v3.0-2.
Could sameone tell me if there is a bug into the procedure or
how i can force the preffered on the good controller before the
faulty restart ?
Any comment and suggestion will be very appreciated
Best regards
/Walter
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 792.1 | SSDEVO::T_GONZALES | Thu Mar 20 1997 09:32 | 12 | ||
You are correct, if a controller is in dual configuration and the
other controller is not running,you can't set preferred ids.
If the controller that is going to be replaced is not running, then
The work around is to set nofailover on the running controller, then
you can set preferred id's on the running controller; then you restart
the other controller and get the error information.
once you get the error information, shutdown the controller that is
going to be replaced then enter the c_swap procedures as listed in the
service guides, I am going to try to get a blitz out that will
list the changes.
| |||||