| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 680.1 | Similar symptom.. | UTRTSC::VISSER | | Thu Nov 14 1996 13:18 | 23 |
| 680.2 | Is it a bug for v2.7 or v3.0 ? | ZPOVC::EDWINWONG | | Thu Nov 14 1996 18:16 | 10 |
| 680.3 | change both cntrs solve problem | ZPOVC::EDWINWONG | | Wed Jan 29 1997 00:04 | 11 |
| Hi,
Today I replace both the upper & lower HSZ40C cntrs & use the
FLU to register all the lic individualy.
After that I use the command "set failover copy=this" to set
to dual reduduncy mode. Finally both console are working fine.
I recreate all the raid set & test OK !!
Edwin.
|
| 680.4 | Not an isolated issue... | CHRONI::MARCHAND | Comfortably Numb | Wed Feb 12 1997 12:58 | 5 |
| I have seen this happen a few times, I suspect that there is an underlying
problem and the replacement of the HSZ's is only addressing the symptom,
not the root cause. Can anyone perhaps shed more light on this...
/bob
|
| 680.5 | HSZ40s console hung. Any news?? | VAXRIO::JEMESSON | | Wed May 21 1997 15:26 | 13 |
|
I got a similary experience. A dual redundant HSZ40s after a upgrade
V27Z to V30Z it was running fine until one of them crashes.
The systems disks was moved to another HSZ40 and following running
well but nothing can be displayed on console ports.
The customer will shutdown the systems saturday and will try a
reboot.
Any comments will be very appreciated.
jemesson
salvador-bahia-brasil
|
| 680.6 | Haven't got a clue but try V3.1 and it should work | SSDEVO::RMCLEAN | | Wed May 21 1997 17:21 | 1 |
| Try an upgrade to V3.1. I think this will solve your problem.
|
| 680.7 | Hosf V3.1, where is it ?? | NNTPD::"[email protected]" | Alexandre Lamotte | Wed May 28 1997 08:40 | 9 |
|
Hi,
Does anyone know from where I can download the V3.1 firmware image ?
Thanks in advance.
Lamotte - MCS/ Brasil
[Posted by WWW Notes gateway]
|