[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference specxn::decevent

Title:DECevent -- keywords KIT* and PAK are available
Notice:DECevent V2.2 available - SHOW KEY/FULL to find note numbers
Moderator:DSNENG::KOLBEN
Created:Fri Jan 07 1994
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:307
Total number of notes:1463

304.0. "What machines are "analysable"??" by BACHUS::PIRLET () Fri May 16 1997 05:59

    	Hello
    
    	I was reading the release notes for v0241 of DECevent.
    
    	Appendix B states what devices are supported for analysis.
    
    I read under alpha system  (for both openvms and unix)
    	-AlphaServer 1000 4/200
    	-AlphaServer 1000a 4/266
    	-AlphaServer 8200 
    	-AlphaServer 8400
    	-DEC 4000
    	-DEC 7000
    
    That is not quite a lot of "analysable machines". I though we could
    analyse AlphaServer 2x00 4/xxx and 2x00 5/xxx, AlphaServer 1000a
    5/xxx...(I got this info from v2.3 release note, did we LOOSE some
    machines from v2.3 to v2.4???)
    
    I never see AlphaServer 4x00 in any release notes, but there is notes
    that seems to say that those machines are "analysable".
    
    	Please, what is THE reality, or does the release notes reflect
    the reality???
    
    	THanks in advance.
    
    	Louis Richard
T.RTitleUserPersonal
Name		DateLines
304.1OLD1S::SYSTEMPM&D PSE Tools SupportFri May 16 1997 08:348
	4x00 will have anlaysis in the 2.5 release sceduled for release on
June 20. The DECevent team is writing code as fast a possible. We do not decide
what devices get coverage, that task is set by MCS mgt. with push from the SBU.

Cheer's

Keith
304.2more info please...BACHUS::PIRLETTue May 20 1997 06:5716
    
    	Thanks Keith
    
	I hope you do not mind if I insist, what about 
    		   AlphaServer 2x00 4/xxx 
                   AlphaServer 2x00 5/xxx
    		   AlphaServer 1000a 5/xxx
    that use to be supported according to v2.3 release note, did we LOOSE some
    machines from v2.3 to v2.4?
    
    	Is there a way to extract this info with a dia command??
    
    	Thanks in advance.
    
    	Louis Richard
304.3OLD1S::SYSTEMPM&D PSE Tools SupportTue May 20 1997 08:3219
	Louis,


   We do not remove support for the devices we have coded in the past. We have
never had analysis for the devices you listed.  I assume you must be reading
appendix A for the devices supported for Bit ti Text. The 2.3 release notes I
have do not indicate analysis for the devices you list. 

We do not have a command that indicate what is supported for Bit to Text. A show
threshold command will give you some idea of what is supported by analysis.  


HTH


Keith