Conference specxn::decevent

280.0. "DIAKNL V2.3-3 Installation problem" by JPNAES::MATSUI (Jun-ichi Matsui /CSC Japan) Wed Feb 26 1997 00:12

During DIAKNL V2.3-3 installation, it deletes DECevent's startup script
/sbin/rc3.d/S15dia.
Tehrefore after DIAKNL V2.3-3 installation, DECevent does not startup.
Please investigate installation script.

regards,
Jun

# ls /sbin/rc3.d
.S96cde          S15dia           S36presto        S59dsn
S00inet          S15named         S40sendmail      S60motd
S01quota         S18nis           S45xntpd         S63write
S04uucp          S19nfs           S46timed         S65lpd
S05settime       S20nfsmount      S49snmpd         S68ffserver
S08startlmf      S21audit         S50common_agent  S68utx
S10syslog        S25preserve      S55inetd         S75acct
S11gateway       S26security      S57cron          S80crashdc
S12route         S27sia           S58lat           S81autoclue
S13rwho          S30rmtmpfiles    S59.0lat-local   S95xdm
# ls -l /sbin/rc3.d/S15dia
lrwxrwxrwx   1 root     bin           20 Feb 26 16:01 /sbin/rc3.d/S15dia -> 
/sbin/init.d/dia_s_k

# setld -l /usr/work/DIA/KNL/DIAKNL_UNXAXP_FULL_233

Automatic analysis is currently running. Executing shutdown procedure
 

DECevent V2.3



         The optional, licensed, software to perform analysis and/or
         notification is enabled.

      Copyright   (c)  Digital Equipment Corporation,  All Rights Reserved.

   This software is proprietary to and embodies the confidential technology
   of Digital Equipment Corporation ("Digital").  This software has been
   installed and enabled to enhance the maintenance services provided by
   Digital.  Use of this software by anyone other than Digital maintenance
   personnel is not permitted without a license.   Customers who have signed
   a Digital Service Agreement ("Agreement") have been granted such a license
   for their own use on equipment covered by the Agreement.  Any other use,
   copying or license to any other party whatsoever is not permitted.
   Digital reserves the right to remove or disable this software at its
   discretion. U.S. Pat. 5,469,463.


*** Enter subset selections ***

The following subsets are mandatory and will be installed automatically
unless you choose to exit without installing any subsets:

      * DECevent KNL update kit                                                 

The subsets listed below are optional:

     There may be more optional subsets than can be presented on a single
     screen. If this is the case, you can choose subsets screen by screen
     or all at once on the last screen. All of the choices you make will
     be collected for your confirmation before any subsets are installed.

     1) DECevent rel notes, postscript                                          
     2) DECevent rel notes, text                                                

--- MORE TO FOLLOW ---
Enter your choices or press RETURN to display the next screen.

Choices (for example, 1 2 4-6): 


Or you may choose one of the following options:

     3) ALL mandatory and all optional subsets
     4) MANDATORY subsets only 
     5) CANCEL selections and redisplay menus
     6) EXIT without installing any subsets 

Enter your choices or press RETURN to redisplay menus.

Choices (for example, 1 2 4-6): 4

You are installing the following mandatory subsets:

        DECevent KNL update kit                                                 

Is this correct? (y/n): y

DECevent KNL update kit
   Copying from /usr/work/DIA/KNL/DIAKNL_UNXAXP_FULL_233 (disk)
   Verifying

        DECevent subset DIAKNL233  has been sucessfully loaded.
        Event log translation is set up for this node.  If you have
        a Product Authorization Key for analysis issue the following
        command after the installation is complete:

                        diasetup


Configuring "DECevent KNL update kit" (DIAKNL233)
Performing DECevent Installation Verification Procedure

Output of DECevent bit to text IVP:

DECevent V2.3


******************************** ENTRY    1 ******************************** 


Logging OS                        2. Digital UNIX 
System Architecture               2. Alpha 
Event sequence number             3. 
Timestamp of occurrence              14-JAN-1995 04:08:06   
Host name                            fluid 

System type register      x00000002  DEC 4000 
Number of CPUs (mpnum)    x00000001 
CPU logging event (mperr) x00000000 

Event validity                    1. O/S claims event is valid 
Event severity                    1. Severe Priority 
Entry type                      100. CPU Machine Check Errors 

CPU Minor class                   1. Machine check (670 entry) 

Frame Revision                x0001 
SCB Vector                    x0670  Processor Machine Check Abort 
FRU 1                           x00  Field Not Valid 
FRU 2                           x00  Field Not Valid 
Severity                      x0000  Field Not Valid 
CPU ID                        x0001 
Error Count                   x0000 
Threshold For Fail Code       x0000 
Fail Code                     x0000 
Error Flag 1              x0000000000200000 
                                     CPU_1 Cache TAG Parity Error 
Error Flag 2              x0000000000000000 

frame id                  x00000000  End of Frame 
byte count                x00000000 

Output of DECevent show settings IVP:

DECevent V2.3

 Current Settings Information: 

 Name                     Value 
 ============================================================================== 
 CMD_TRACE                     0 
 CTR_TRACE                     0 
 DEBUG_STATE                   0 
 ETC_TRACE                     0 
 FMG__DEBUG_STATE              0 
 FMG__TRACE_STATE              0 
 RPT_TRACE                     0 
 TRACE_STATE                   0 
 CTR__DMP_RUL                  ROOT.DUMP_EVENT_CA 
 CTR__RUL_LIB                  CTR__DEF_RUL_LIB 
 CTR__SUM_LIB                  CTR__DEF_SUM_LIB 
 DEF_CTR_RULE                  ROOT.HEADER_CA 
 DEF_ETC_RULE                  ROOT.HEADER_EV.OSF_HEADER_EV 
 ETC__DMP_RUL                  ROOT.DUMP_EVENT_EV 
 ETC__RUL_LIB                  ETC__DEF_RUL_LIB 
 ETC__SEL_LIB                  ETC__DEF_SEL_LIB 
 RPT__RUL_LIB                  RPT__DEF_RUL_LIB 
 HELP_FILE                     FMG_HELP_FILE 
 CURRENT_CLI                   UNIX 
 VMS_DEFAULT                   /TRANSLATE 
 UNIX_DEFAULT                  -a 
 CHEROKEE_VMS_DEFAULT          /TRANSLATE 
 DEF_EVT_LOG                   /usr/adm/binary.errlog 
 LOCALE                        AMERICAN_ENGLISH 
 PRINT_MESSAGES                7 
 STREAM_SIZE                   20 
 SYS_ACT_LOG_NAME              DIA_ACTIVITY.LOG 
 KNL__DEF_ENTRIES              32 
 KNL__LIB_DIRECTORY            DIA_LIBRARY 
 KNL__LIB_PREFIX               FMG_ 
 KNL__LIB_SUFFIX               .KNL 
 VAX_VMS_STACK_SIZE            10 
 VAX_VMS_GUARD_SIZE            3 
 ALPHA_VMS_STACK_SIZE          50 
 ALPHA_VMS_GUARD_SIZE          30 
 RULE_MAX_BYTECNT              100000 
 DEFAULT_REPORT                FULL_RE 
 ANA_TRACE                     0 
 NOT_TRACE                     0 
 ANA__FAC_DB                   ANA__FAC_STATE_DB 
 ANA__PRM_DB                   ANA__PRM_STATE_DB 
 ANA__RUL_LIB                  ANA__DEF_RUL_LIB 
 ANA__TMP_DB                   ANA__TMP_STATE_DB 
 NOT__RUL_LIB                  NOT__DEF_RUL_LIB 
 NOT__MAIL_LIB                 NOT__DEF_MAIL_LIB 
 NOT__EXTERNAL_LIB             NOT__DEF_EXTERNAL_LIB 
 FMG__CUST_PROFILE             /usr/sbin/DIA120/FMGPROFILE 
 FMG_VERSION                   2.3 
 SICL_STATE                    OFF 
 SICL_PROTOCOL_VERS            1 
 AUTO_COPY                     OFF 
 ANALYSIS_TRIGGER_AUTOMATIC    AUTOMATIC 
 ANALYSIS_TRIGGER_MANUAL       MANUAL 
 NOT__DEF_CSC_PHONE            1-800-354-9000 
 NOT__MAX_DSNLNK_MSG           59 
 MAIL_DEBUG                    0 

DECevent IVP completed successfully


        
                You must define the following environmental variable in order
                to use this product:

                  csh> setenv DIA_LIBRARY /var/DIA

                or

                  sh> set DIA_LIBRARY=/var/DIA
                  sh> export DIA_LIBRARY 


                To start automatic analysis type:

                     /usr/sbin/diasetup

# ls /sbin/rc3.d
.S96cde          S15named         S40sendmail      S60motd
S00inet          S18nis           S45xntpd         S63write
S01quota         S19nfs           S46timed         S65lpd
S04uucp          S20nfsmount      S49snmpd         S68ffserver
S05settime       S21audit         S50common_agent  S68utx
S08startlmf      S25preserve      S55inetd         S75acct
S10syslog        S26security      S57cron          S80crashdc
S11gateway       S27sia           S58lat           S81autoclue
S12route         S30rmtmpfiles    S59.0lat-local   S95xdm
S13rwho          S36presto        S59dsn
# ls /sbin/rc3.d/*dia
No match.
# 

Did you run the diasetup after the installation? This routine sets up a soft
link of  ln -fs /sbin/init.d/dia_s_k /sbin/rc3.d/S15dia and should resolve your
issue. This is the first report I have had of this nature. Please verify that
the diasetup was run after the installation.

Cheer's

Keith

Thanks Keith,

I did not run the diasetup. After that, S15dia was linked correctly.

Jun