Conference smurf::ase

2032.0. "How to write script to Manage DECserver ?" by HGOVC::SOCHUNWAH () Tue Apr 29 1997 22:45

Original Problem was : Some DECserver 900TM port hang after ASE failover

Those DECserver ports were configured with dedicated LAT service.  When
Oracle disk service service failover, some of the ports found hung.  And
We can logout the "hung" ports to reset the ports.  However, as the
oracle disk service had failovered to another system, we are in fact
do not need to keep the connection to the original disk service owner
system (because the LAT service will be re-start from the start script 
of the Oracle disk service).

Consider the "restting of all DECserver ports" as a necessary steps when 
failover disk services (especially in my case here).  I would like to put 
the commands in the DECsafe script to handle the 'port reset' task.  I had 
tried use "ccr" to connect to the DECserver and logout all ports without 
any problem.  But I have to do it interactively.

My probelm now is : How can I be able to use script commands to perform the
same thing ?  I am not familar with UNIX script writing, if I can have some
similar script example, I beleive I can make some modification accordingly 
to make it work.

This notes will be cross-posted in "Digital UNIX" as well as "ASE" 


Any advise, comment and suggestion are welcome !!!


Thanks in advance
Chun-wah SO @HGO