[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference pamsrc::objectbroker

Title:ObjectBroker - BEA Systems' CORBA
Notice:See note 3 for kits; note 5 for training; note 1134 for releases
Moderator:TLE::PARODId
Created:Tue Jul 11 1989
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1413
Total number of notes:6391

1405.0. "%OBB-E-INV_CANTGETAUTH" by JOBURG::BERETTA () Mon May 19 1997 12:07

           Hi,
    
        I just upgraded a decedi 2.1c VMS alpha system to 2.1d and upgraded
        objectbroker to 2.7-10.
    
        When I run the decedi$configure_obb.com I get the following error:
    
        Objectbroker error occured in DECEDI_IMC_IMPL_REGISTER
        Objectbroker error: %OBB-E-INV_CANTGETAUTH, could not get an
        authentication key from node '$node$'.
        -OBB-E-INV_CANTGETAUTH, Could not get an authentication key from
    node
        '<nil>'.
    
        Any help much appreciated.
    
        Peter.
     
    (cross posted in the DECEDI conference)
T.RTitleUserPersonal
Name		DateLines
1405.1Some info neededREQUE::whocrz.zko.dec.com::GumbelDick GumbelMon May 19 1997 13:3519
Try some obb commands to see if your installation is working ok:

	$ application /broker show version
	$ application /broker show configuration
	$ application /broker show agent

Post the results here.

Also, are you doing this on a VMScluster?  Are you running
the software on the same node you did the installation of OBB?
If not, did you run the sys$startup:obb$add_cluster_node.com
procedure on each node in the VMScluster?



   Dick Gumbel
   ObjectBroker development
1405.2single node - here is the outputJOBURG::BERETTATue May 20 1997 00:2236
    Hi Dick,
    
    Here is the output from the commands:
    
    OBB> show version
    OBB V2.7-10
    Copyright Digital Equipment Corporation 1991, 1996. All rights
    reserved.
    OBB> show configuration
    
     Configuration  "TCP/IP-Only Configuration"  (Current) 
     -------------------------------------------------------
      Authentication
        AuthrWOAuthn: Disabled
        Package:      Trusted
         Description: Trusted authentication package
      Network
        Package:      TCP
         Description: TCP/IP transport package
      Logging Level                  None
      Keep database files            0
      Object Hash Table Size         0
    
    OBB> show agent
    %OBB-E-INV_CANTGETAUTH, Could not get an authentication key from node
    `$Node$'. 
    -OBB-E-INV_CANTGETAUTH, Could not get an authentication key from node
    `<nil>'. 
    OBB>
    
    This is a standalone system, not a cluster and I ran the config com
    procedure from the same session straight after I installed v2.7.
    
    Thanks for your help,
    
    Peter.
1405.3Working now after a reinstallJOBURG::BERETTATue May 20 1997 10:3312
    Hi,
    
    I managed to get it working by re-installing and choosing the option 3
    which enables decnet and tcpip. I had selected option 2 previously (tcpip
    only). I also installed it from the system account this time, in case
    this made a difference. 
    
    What put me onto to this was having only read the release notes after I 
    encountered the problem, I noticed that if you choose the tcpip only 
    option, AuthrWOAuthn should be set to enabled in trusted environments. 
    I tried changing this to enabled  and got the message "command
    failure". So then I re-installed as mentioned above.
1405.4Here is the vms command to fix itREQUE::whocrz.zko.dec.com::GumbelDick GumbelTue May 20 1997 11:2411
The VMS command to change that setting is:

 $ appl/broker modify config /accept_authr_wo_authn "TCP/IP-Only Configuration"

You could reset your config to tcp/ip-only and issue this command.



    Dick