[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference pamsrc::objectbroker

Title:ObjectBroker - BEA Systems' CORBA
Notice:See note 3 for kits; note 5 for training; note 1134 for releases
Moderator:TLE::PARODId
Created:Tue Jul 11 1989
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1413
Total number of notes:6391

1399.0. "%OBB-E-REG_KEYNOTFND AFTER UPG TO V2.6 help?" by GIDDAY::SHCHIU () Wed May 14 1997 03:23


vax/vms v6.2 STANDALONE NODE,
user upgrade OBJECTBROKER FROM V2.5A TO V2.6 , and found

ivp failed 


I have requested user to gather the output :


Can someone help on this ?


rgds

/stanley 

--------------------------------------


=00$ SHO LOGICAL ACAS*


(LNM$PROCESS_TABLE)

(LNM$JOB_84C2BE40)

(LNM$GROUP_000001)

(LNM$SYSTEM_TABLE)

(DECEDI$LOGICAL_NAMES)

(DECW$LOGICAL_NAMES)
%SHOW-S-NOTRAN, no translation for logical name ACAS*
=00$

=00$ DIR /SIZ=3DALL/DAT OBB$LIBRARY:*.REG*


Directory SYS$SYSROOT:[OBB]

OBB_SYSTEM_REGISTRY.REG;7
                          36/36       13-MAY-1997 11:59:47.04
OBB_SYSTEM_REGISTRY.REG;6
                          36/36       13-MAY-1997 11:59:45.37
OBB_SYSTEM_REGISTRY.REG;5
                          36/36       11-MAY-1997 13:02:27.16
OBB_SYSTEM_REGISTRY.REG;4
                          36/36       11-MAY-1997 13:02:26.01
OBB_SYSTEM_REGISTRY.REG;3
                          36/36       11-MAY-1997 12:57:09.58
OBB_SYSTEM_REGISTRY.REG;2
                          12/12       11-MAY-1997 12:57:08.25
OBB_SYSTEM_REGISTRY.REG;1
                          12/12       11-MAY-1997 12:57:07.77

Total of 7 files, 204/204 blocks.

Directory SYS$COMMON:[OBB]

OBB_SECURITY_REGISTRY.REG;1
                          12/12       11-MAY-1997 12:57:12.62

Total of 1 file, 12/12 blocks.

Grand total of 2 directories, 8 files, 216/216 blocks.
=1A
--------------70981885910
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="A.TMP"


Key Name:               REG_KEY_SYSTEM\Configurations
Last Write Time:        Sun May 11 12:57:08 1997


Key Name:               REG_KEY_SYSTEM\Configurations\ConfigSet001
Last Write Time:        Tue May 13 11:59:45 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               31
  Data:                 "DECnet and TCP/IP Configuration"


Key Name:               REG_KEY_SYSTEM\TCP
Last Write Time:        Tue May 13 11:59:45 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               24
  Data:                 "TCP/IP transport package"


Key Name:               REG_KEY_SYSTEM\OrbV12
Last Write Time:        Tue May 13 11:59:45 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               26
  Data:                 "ObjectBroker Agent package"


Key Name:               REG_KEY_SYSTEM\DCE
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               26
  Data:                 "DCE authentication package"

Value 1
  Name:                 FamilyName
  Type:                 REGKEY_SZ
  Length:               3
  Data:                 "DCE"

Value 2
  Name:                 ErrorControl
  Type:                 REGKEY_LONGINT
  Length:               4
  Data:                 0

Value 3
  Name:                 Group
  Type:                 REGKEY_SZ
  Length:               22
  Data:                 "AuthenticationProvider"

Value 4
  Name:                 ImagePath
  Type:                 REGKEY_EXPAND_SZ
  Length:               12
  Data:                 "%OB_Sec_DCE%"


Key Name:               REG_KEY_SYSTEM\DCE\Parameters
Last Write Time:        Sun May 11 12:57:09 1997


Key Name:               REG_KEY_SYSTEM\DCE\Attributes
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 AuthnLevel
  Type:                 REGKEY_MULTI_SZ
  Length:               3
  Data:                 "Disabled"
+++++++++               "Enabled"
+++++++++               "Mutual"


Key Name:               REG_KEY_SYSTEM\CORBA
Last Write Time:        Sun May 11 12:57:09 1997


Key Name:               REG_KEY_SYSTEM\CORBA\CodeGeneration
Last Write Time:        Sun May 11 12:57:10 1997


Key Name:               REG_KEY_SYSTEM\CORBA\CodeGeneration\C
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               1
  Data:                 "C"

Value 1
  Name:                 FamilyName
  Type:                 REGKEY_SZ
  Length:               1
  Data:                 "C"

Value 2
  Name:                 ErrorControl
  Type:                 REGKEY_LONGINT
  Length:               4
  Data:                 0

Value 3
  Name:                 ImagePath
  Type:                 REGKEY_EXPAND_SZ
  Length:               26
  Data:                 "sys$share:obb$cmdccshr.exe"


Key Name:               REG_KEY_SYSTEM\CORBA\CodeGeneration\CXX
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               3
  Data:                 "C++"

Value 1
  Name:                 FamilyName
  Type:                 REGKEY_SZ
  Length:               3
  Data:                 "C++"

Value 2
  Name:                 ErrorControl
  Type:                 REGKEY_LONGINT
  Length:               4
  Data:                 0

Value 3
  Name:                 ImagePath
  Type:                 REGKEY_EXPAND_SZ
  Length:               26
  Data:                 "sys$share:obb$cmdccshr.exe"


Key Name:               REG_KEY_SYSTEM\CORBA\CodeGeneration\NON_ANSI_C
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               10
  Data:                 "Non ANSI C"

Value 1
  Name:                 FamilyName
  Type:                 REGKEY_SZ
  Length:               10
  Data:                 "Non ANSI C"

Value 2
  Name:                 ErrorControl
  Type:                 REGKEY_LONGINT
  Length:               4
  Data:                 0

Value 3
  Name:                 ImagePath
  Type:                 REGKEY_EXPAND_SZ
  Length:               26
  Data:                 "sys$share:obb$cmdccshr.exe"


Key Name:               REG_KEY_SYSTEM\CORBA\CodeGeneration\VB
Last Write Time:        Tue May 13 11:59:47 1997

Value 0
  Name:                 DisplayName
  Type:                 REGKEY_SZ
  Length:               12
  Data:                 "Visual Basic"

Value 1
  Name:                 FamilyName
  Type:                 REGKEY_SZ
  Length:               12
  Data:                 "Visual Basic"

Value 2
  Name:                 ErrorControl
  Type:                 REGKEY_LONGINT
  Length:               4
  Data:                 0

Value 3
  Name:                 ImagePath
  Type:                 REGKEY_EXPAND_SZ
  Length:               26
  Data:                 "sys$share:obb$cmdvbshr.exe"




------------------------------


ivp log 


 set verify
$!
$! Wait to make sure Agent is fully running
$!
$ WAIT 00:00:10
$!
$! Show the agent
$!
$ Say "Showing the ObjectBroker agent attributes..."
Showing the ObjectBroker agent attributes...

P$ APPLICATION/BROKER SHOW AGENT

%OBB-F-COM_INVSETUP, Invalid environment setup.

$OBB_IVP_ERROR:
$!
$ obb$err_status =3D $STATUS
$!
$ GOSUB OBB_IVP_CLEAN_UP
$OBB_IVP_CLEAN_UP:
$!
$ SET NOON
$!
$ SET ON
$!
$ RETURN
$!


--------------------


REDO INSTALLATION OF OBJECT BROKER V2.6-07
and ivp run with 

%OBB-E-REG_KEYNOTFND




+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

       Beginning Installation Verification Procedure for
            ObjectBroker for OpenVMS V2.6-07

***************************************************************************
 !
$ WAIT 00:00:10
$!
$! Show the agent
$!
$ Say "Showing the ObjectBroker agent attributes..."
Showing the ObjectBroker agent attributes...
$ APPLICATION/BROKER SHOW AGENT

%OBB-E-REG_KEYNOTFND, Could not find key `Select'.
$OBB_IVP_ERROR:
$!
$ obb$err_status = $STATUS
$!
$ GOSUB OBB_IVP_CLEAN_UP
$OBB_IVP_CLEAN_UP:
$ SET NOON
T.RTitleUserPersonal
Name		DateLines
1399.1Some questions for youREQUE::whocrz.zko.dec.com::GumbelDick GumbelWed May 14 1997 09:1915
Were there any error messages during the installation?

Please try the following command and post the output:

	$ application /broker show configuration

Also, what transport(s) are you running?

	DECnet Phase IV or Phase V?
	TCP/IP (ie UCX)


 Dick Gumbel
 ObjectBroker Development
1399.2feedback from userGIDDAY::SHCHIUWed May 14 1997 21:4624
    
    
    reply .-1
    
    
    thank for the help.
    
    Sorry for my ignorance, I have limited knowledge on Objectbroker.
    
    feedback from user :
    
    
    $ application /broker show config
    %OBB-E-REG_KEYNOTFND, Could not find key `Select'.
    
    
    The system has DECnet Phase V and ucx installed.
    The objectbroker 's transport is either running on ucx or decnet.
    
    
    rgds
    
    /stanley.
1399.3installation log outputGIDDAY::SHCHIUThu May 15 1997 03:51101
    
    reply .1
    
    the following contains the installation log:
    
    rgds
    
    
    /stanley 
    

The following products will be processed:

  OBBRTO V2.6

	Beginning installation of OBBRTO V2.6 at 12:55

%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

                ObjectBroker for OpenVMS, V2.6-07

                    Copyright (c) 1991, 1996 by
            Digital Equipment Corporation, Maynard, MA
                       All Rights Reserved.

***************************************************************************
%OBBRTO-I-REPLACE, Replacing existing OBB installation.

    You can select the following transport usage for your system:

	    1) DECnet only
	    2) TCP/IP only
	    3) Both DECnet and TCP/IP

* Enter the number of the transport setup to be enabled [2]: 3

* Do you want to purge files replaced by this installation [YES]?

* Do you want to run the IVP after the installation [YES]?

%OBBRTO-I-DONEASK, No further questions will be asked during this installation.

%VMSINSTAL-I-RESTORE, Restoring product save set B ...
%VMSINSTAL-I-RESTORE, Restoring product save set C ...
%VMSINSTAL-I-SYSDIR, This product creates system directory [OBB].

    If you intend to execute this layered product on other nodes in your
    VAXcluster, and you have the appropriate software license, you must
    prepare the system-specific roots on the other nodes by issuing the
    following command on each node (using a suitably privileged account):

	$ CREATE /DIRECTORY SYS$SPECIFIC:[OBB]/PROTECTION=(S:RWED,O:RWED,G:RE,W:RE)
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  VMI$SPECIFIC:[OBB.SAK].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  VMI$SPECIFIC:[OBB.SCRATCH].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  VMI$SPECIFIC:[OBB.SAK.EPAF05].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  VMI$SPECIFIC:[OBB.SCRATCH.EPAF05].

	NOTE - If you intend to execute ObjectBroker on other nodes in your
	       VMScluster, and you have the appropriate software license, you
	       must register the node with ObjectBroker and the appropriate
	       system-specific directories must be created.  This can be done
	       by executing the procedure SYS$MANAGER:OBB$ADD_CLUSTER_NODE.COM
	       on the node (using a suitably privileged account).

	NOTE -  Existing repositories and context objects may have to be
	        re-created.  Please check the release notes for details.

**************************************************************************

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Starting registry setup
%OBB-E-REG_KEYNOTFND, Could not find key `$Keyname$'.
Starting ObjectBroker Agent
%RUN-S-PROC_ID, identification of created process is 21800251

***************************************************************************

       Beginning Installation Verification Procedure for
	    ObjectBroker for OpenVMS V2.6-07

***************************************************************************

Showing the ObjectBroker agent attributes...

%OBB-E-REG_KEYNOTFND, Could not find key `Select'.


***************************************************************************

          Installation Verification Procedure failed for
	      ObjectBroker for OpenVMS V2.6-07

***************************************************************************

%VMSINSTAL-E-IVPFAIL, The IVP for OBBRTO V2.6 has failed.

	VMSINSTAL procedure done at 12:57
1399.4DECnet Phase V is your problem...REQUE::whocrz.zko.dec.com::GumbelDick GumbelThu May 15 1997 09:5323
The problem is that OBB V2.6 does NOT support DECnet Phase V. However,
OBB V2.7 does support it!  Here's what you need to do so ensure a
clean upgrade/install to OBB V2.7:

1. Delete the following files:
	$ delete obb$library:obb_system_registry.reg;*
	$ delete sys$library:obb$shr.exe;*

2. Get the latest OBB V2.7 kit (patched beyond 2.7 ssb):
	send::obb$kits:[v27.v2711.vms]

3. Then do the usual OBB installation with vmsinstal.


This should get you to a working OBB on your DECnet Phase V
system.



  Dick Gumbel
  ObjectBroker Development
1399.5thanks, will let you after v2.7 install.GIDDAY::SHCHIUThu May 15 1997 21:3113
    
    
    reply.-1
    
    
    thanks Dick,
    
    will let you know for the result.
    
    
    rgds
    
    /stanley
1399.6installation failed : -OBB-E-DB_DBNOTFNDGIDDAY::SHCHIUMon May 26 1997 02:28171
    
    
    Dick,
    
    Apparently after v2.7 installed, the ivp still has problem,
    I have included the installation log :
    
    

    rgds
    
    
    /stanley

Content-Disposition: inline; filename="OBB027_I.LOG"


The following products will be processed:

  OBBRTO V2.7

	Beginning installation of OBBRTO V2.7 at 14:32

%VMSINSTAL-I-RESTORE, Restoring product save set A ...

    Release notes included with this kit are always copied to SYS$HELP.

    Additional Release Notes Options:

	1.  Display release notes
	2.  Print release notes
	3.  Both 1 and 2
	4.  None of the above

* Select option [2]: 3

* Queue name [SYS$PRINT]:

Job OBBRTO027 (queue BRNQ71, entry 206) started on BRNQ71

EPAF05$DKA300:[SYS0.SYSUPD.OBBRTO027]OBBRTO027.RELEASE_NOTES;1

* Do you want to continue the installation [NO]? yes

%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.=


                ObjectBroker for OpenVMS, V2.7-11

                    Copyright (c) 1991, 1996 by
            Digital Equipment Corporation, Maynard, MA
                       All Rights Reserved.

***************************************************************************=

%OBBRTO-I-REPLACE, Replacing existing OBB installation.

    You can select the following transport usage for your system:

	    1) DECnet only
	    2) TCP/IP only
	    3) Both DECnet and TCP/IP

* Enter the number of the transport setup to be enabled [2]: 3

* Do you want to purge files replaced by this installation [YES]?

* Do you want to run the IVP after the installation [YES]?

%OBBRTO-I-DONEASK, No further questions will be asked during this installat=
ion.

%VMSINSTAL-I-RESTORE, Restoring product save set B ...
%VMSINSTAL-I-RESTORE, Restoring product save set C ...

	NOTE - If you intend to execute ObjectBroker on other nodes in your
	       VMScluster, and you have the appropriate software license, you
	       must register the node with ObjectBroker and the appropriate
	       system-specific directories must be created.  This can be done
	       by executing the procedure SYS$MANAGER:OBB$ADD_CLUSTER_NODE.COM
	       on the node (using a suitably privileged account).

	NOTE -  Existing repositories and context objects may have to be
	        re-created.  Please check the release notes for details.

**************************************************************************

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories=
=2E..
Starting registry setup
Completed registry setup
Starting ObjectBroker Agent
%RUN-S-PROC_ID, identification of created process is 2220045F

***************************************************************************=


       Beginning Installation Verification Procedure for
	    ObjectBroker for OpenVMS

***************************************************************************=


Showing the ObjectBroker agent attributes...




Agent on node: EPAF05


  Version:      OBB V2.7-11


  Username:     system


  Time Started: Mon May 26 14:35:51 1997


  Pid:          2220045F


  Log Filename: SYS$SPECIFIC:[OBB.SCRATCH.EPAF05]OBB$AGENT.LOG;2


  Attributes:
AuthrWOAuthn is DISABLED



Active transports are DECnet, TCPIP



OrbV12 style Agent





%OBB-E-CMD_DBERROR, Repository error.


-OBB-E-DB_DBNOTFND, Repository `SYS$COMMON:[OBB]OBB_SYSTEM_REPOSITORY.IR' n=
ot


		found.


***************************************************************************=


          Installation Verification Procedure failed for
	      ObjectBroker for OpenVMS

***************************************************************************=


%VMSINSTAL-E-IVPFAIL, The IVP for OBBRTO V2.7 has failed.

	VMSINSTAL procedure done at 14:36


=00$

=00$ lo

  SYSTEM       logged out at 26-MAY-1997 14:36:51.44
1399.7forgot to delete file prior installation , works now.GIDDAY::SHCHIUMon May 26 1997 03:4614
    
    
    Dick,
    
    My apologise for the previous note,
    User did not following your suggestion to delete file recommended 
    by you. after having done that, installation gone through successfully.
    
    
    Many thanks.
    
    
    /stanley