| Title: | Novell NetWare |
| Moderator: | NETCAD::STEFANI |
| Created: | Wed Feb 27 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2146 |
| Total number of notes: | 7285 |
Hi, A customer reports 3 Prioris XL 590 DP machines with BIOS 2.08 are hanging after enabling SMP with the MPS14.PSM file. IWSP2.EXE is applied, which means the version of MPS14 is from December 10, 1996 (config.nlm report). The client does not get the hang on a Prioris XL 5166 DP when he takes the hardware from one of the 590's and puts it into the 5166 DP with the same system disks. SCU 1.10 was used, and I am sending out SCU 1.12 in the hope that this is some screwy low-level problem. The Web server and Mercury Mail are both on these machines. Has this behaviour been noted before? What could be the difference between the 5166 and the 590? Cross posting to PRIORIS. Thanks & regards, Adrian Moore [Posted by WWW Notes gateway]
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2132.1 | Check the Main Logic Board. | SUTRA::sutra::zuntini | PCBU Support Europe | Thu Mar 27 1997 04:34 | 14 |
>>The client does not get the hang on a Prioris XL 5166 DP when he takes >>the >>hardware from one of the 590's and puts it into the 5166 DP with the same >>system disks. do you mean you plugged the 590dp cpu daughter board into the 5166 MLB ?. If yes, then check the MLB p/n near the bottom most EISA slot: you should read 54-23984 on both machine. If you read 54-23456, it must be upgraded to support dual processor. -armand. | |||||
| 2132.2 | MLB to be swapped | NETRIX::"[email protected]" | Adrian Moore | Sun Apr 06 1997 19:46 | 8 |
Hi, Thanks for the info. The board is to be swapped since it had the 54-23456 p/n. Thanks & regards, Adrian Moore [Posted by WWW Notes gateway] | |||||