| Title: | Windows NT |
| Notice: | See note 15.0 for HCL location |
| Moderator: | TARKIN::LIN .com::FOLEY |
| Created: | Thu Oct 31 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6086 |
| Total number of notes: | 31449 |
I am having a proble with a Celebris GL running Windows NT 4.0 After the system is booted I see an entry in the event logger about the piixide driver being in conflict with another driver which seems to be atapi driver. The mesage in the event logger is: A conflict has been detected between two drivers which claimed two overlapping io port areas. In Windows NT diagnostics under the atapi driver is see it with two enteries input/output range 01f0 - 01f7 IRQ 14 and input/output range 0170 - 0177 IRQ 15 Under SCSI adapters I see that it is used to drive scsi adapter 0 which is where the cdrom is located and scsi adapter 1 which is where the hard hard disks are located. What is also see is that both the piixide and the atapi drivers, the atapi driver showing started and the piixide not started. Should I be removing or disabling one of these drivers from the system? dave
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6034.1 | atapi makes an EIDE bus look like a scsi bus to NT | KEIKI::WHITE | MIN(2�,FWIW) | Thu May 22 1997 18:35 | 8 |
Botht eh Atapi and the PiixIDE drivers try to control the primary
and secondary EIDE buses. Luckily at least one wins:-).
Go ahead and remove the PIIXIDE driver. I was told there were bugs
in it anyway.
Bill
| |||||