| Title: | Windows NT |
| Notice: | See note 15.0 for HCL location |
| Moderator: | TARKIN::LIN .com::FOLEY |
| Created: | Thu Oct 31 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6086 |
| Total number of notes: | 31449 |
Hello. We have a problem trying to configure LPS17 printers to load off an NT 3.51 server. We installed DECPRINT-LPS v5.1 software on the server and configured an LPS17/600 for a print share and software loading. Printing to share worked fine as did the remote console facility. However when we tried to get the printer to load from the NT box we had no luck. We just get ?54 on the printer panel. When I look at the network activity the printer sends out 8 Ethernet broadcast packets followed by four IP broadcasts. There is no response from the NT box. Also when a DIGTIAL PRISM diagnostic window is opened on the server it continually loops and complains. It specifys the correct IP address of the printer but fails with "cpap connect failed for printer". When I remove the DECPRINT services and enable MOP loading on my VAX the same printer loads successfully, both primary and secondary loads. I can then ping the same printer from the NT box. Can anyone help with this ? Colin 751 4062
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6006.1 | Check firmware | RDVAX::akocstdhcp88-102.ako.dec.com::levy | Run Like an Antelope | Thu May 15 1997 13:28 | 4 |
Check the firmware on the Printer. Also, you'll get more help in the HUMANE::POSTCRIPT_PRINTING notesfile on PrintServer issues. dave | |||||