| Title: | Windows NT | 
| Notice: | See note 15.0 for HCL location | 
| Moderator: | TARKIN::LIN .com::FOLEY | 
| Created: | Thu Oct 31 1991 | 
| Last Modified: | Fri Jun 06 1997 | 
| Last Successful Update: | Fri Jun 06 1997 | 
| Number of topics: | 6086 | 
| Total number of notes: | 31449 | 
    Hi
    I have a number of Ultra II laptops that I have to deliver to a
    customer with WinNT V4.0 as the o/s. For historical reasons these
    machines are currently running WinNT V3.51 with SP5. 
    I would appreciate some guidance on what is required to upgrade to NT
    V4.0 (ie any special drivers or power management facilities) and where
    to locate them.
    I have also seen a few notes indicating that installing NT SP2 may be
    problematical and not a good idea. Is there any "official" person I can
    contact to determine the exact status of SP2 on the ULTRA IIs and
    whether there are special precautions/actions required in order to
    install this service pack ?
    Many thanks
    John
    Cross posted in DECPC_PORTABLE
    
| T.R | Title | User | Personal Name | Date | Lines | 
|---|---|---|---|---|---|
| 6001.1 | DECWET::VOBA | Tue May 13 1997 09:13 | 5 | ||
|     Re .0, according to the folks supporting the HiNote Ultra II, only NT
    4.0/SP1 is supported.  Installing SP2 and later (i know the current
    pre-release of SP3 crashes it) at your own risks.
    
    --svb
 | |||||
| 6001.2 | NT 4 / SP2 works for me | RDVAX::akocstdhcp88-102.ako.dec.com::levy | Run Like an Antelope | Tue May 13 1997 10:01 | 26 | 
| I am running an Ultra II with 4.0/SP2 successfully...even
dual-booting with Windows 95.
As I recall, you'd want to do things in the following sequence:
  1 - Get the Digital bits for NT 4.0 from the PCBU web site at
      pcbu.ako.dec.com.  Expand the kits to the C drive of the 
      laptop.  You'll need them later!
      There is even an upgrade instructions document there.
      You'll want WGHNU21K.EXE
  2 - Install NT 4.0 from CD/Network and make sure you can get the
      Digital support stuff (power management, MMM stuff,suspend)
      running ok.
  3 - Install SP2 and re-apply the Digital support.
I have NO idea about SP3.  I'd want a good backup before trying it.
	dave
It ain't straightforward, but it works.
 | |||||
| 6001.3 | Thx | RDGENG::ABRAM | John Abram | Wed May 14 1997 01:38 | 1 | 
| :.2 Thanks, we'll try this and see what happens :-) | |||||