| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1107.1 | It's in the Release notes for V4.2 | STAR::DEMERS | Leo 381-2245 OpenVMS/SEVMS SecurityPM | Tue Mar 19 1996 17:29 | 14 |
| 1107.2 | Need license information | CSC32::G_BURTT | | Thu Mar 21 1996 09:16 | 8 |
| 1107.3 | Try setting "compat_mode v55" | CSC32::J_GAINES | | Sat Mar 30 1996 19:05 | 63 |
| 1107.4 | correction for TYPO in last reply. | CSC32::J_GAINES | | Sat Mar 30 1996 19:10 | 12 |
| 1107.5 | I can not get it to work | SPOOKS::WINCE | | Wed May 07 1997 19:08 | 22 |
| I have a new vax 7000 model 840 that I am trying to install Open VMS
V5.5-2 on.
I have upgraded all the cpu's to console version 4.2-4835 and set
compat_mode to v55.
When I boot the Open VMS versions 5.5-2h4 cd I get the vms banner and
then it gives me a bugcheck code of 000000374
pc - 9e99691e
sp - 9ffbd558
ext ps - 9e9968a1
psl - 041f8609
and the system halts.
If I build Standalone backup from a vms system running VMS 5.5-2 it
does the same thing.
If I boot off of the Open VMS 6.2 cd it works fine?
Have I missed a step somewhere?
ANy help would be greatly appreciated.
Thanks,
Brian Wince
(408)747-3788
dtn 521-3788
|
| 1107.6 | Too much memory? | CSC32::B_HIBBERT | When in doubt, PANIC | Thu May 08 1997 12:30 | 5 |
| The bugcheck code of 374 is a PTELENVIOL bugcheck. How much memory is
installed in this system? VMS 5.5-2 only supports 512 MB.
Brian Hibbert
|
| 1107.7 | 512mb of memory | SPOOKS::WINCE | | Thu May 08 1997 13:02 | 4 |
| Thanks for the quick reply.......
The system has two 128mb memory modules, two cixcd's a demna and a cmd
controller on the bi...
|
| 1107.8 | now it boots | SPOOKS::WINCE | | Thu May 08 1997 16:53 | 8 |
| On my previous entry I stated the system had two 128mb memory, I meant
it had two 256mb modules.
In any event I got the system to boot v5.5-2h4 by removing the bi.
I gues that is why the release notes say the bi is not supported.
Thanks for all of your help and I hope this helps someone in the
future.
|