| Title: | Proudly built by the engineers of NaC Australia |
| Moderator: | DELNI::MUGGERIDGE |
| Created: | Mon Oct 12 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 908 |
| Total number of notes: | 3829 |
Please help me to find a hardware manual for PBXDP-AA or...... I need information of the short adapter cable comming from the module, (is it bc19f-02 or..bc12g...or...) going to the modem cable. Do I need a dual cable or one for each port ? I also need partnumber for the modem cable (bn12g or bc19f or bc19l) please help me anyone. Regards Hans.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 893.1 | I don't think you need a hardware manual | OZROCK::HARTWIG | Arthur Hartwig, TaN Engineering-Australia | Fri Apr 25 1997 03:22 | 12 |
The PBXDP-Ax series modules come with a cable that plugs into the board
and connects to a RS-232 modem. If you want to use another type of
electrical interface you need an adapter that plugs between the modem
and the cable from the board.
I suggest you contact the product manager John (WRKSYS::) Eyemaro for
details of the code numbers for the adapters. Note that the cabling is
somewhat different in detail from cables that were used on DNSES/DSYT1
boards. The principle is similar; the board supports a variety of
electrical interfaces with a special adapter needed for particular
specific electrical interfaces.
| |||||