Conference noted::wireless_lans

    Hi Youda,
    
    The current windows NT driver works fine on Windows NT 4.0.  You can
    find the drivers on our internal WWW site as beta5b (I need to get
    these released).
    
    In the next month, I expect to get a final version released.  The
    current version runs fine on NT and the current Version of 95.  Very
    recently, MicroSoft released a new version that the drivers do not
    currently work with.  I am currently testing a new version.  If you
    know of anyone using MS's new operating system (OSR2, V4.00.950b) I can
    send them a copy.
    
    Regards,
    Jeff
    RoamAbout Wireless Engineering 
    http://www.networks.digital.com/dr/wireless
    http://www-wireless.lkg.dec.com (Internal Only)
    http://www.networks.digital.com

Thanks Jeff ,

This one is very strange.......We are using the FHBETA5.ZIP drivers.

The person has a HiNote Ultra II with CD-ROM ( like mine that works fine with
WIN 95 ) and is running WIN NT V4.0 - SERVICE PACK II .

The installations goes fine but, NT Event logger reports : Can't find the
card, and does not repoert on IRQ/MEM conflict.

We have tried different IRQs 11 ( default one ), 7 and 5 and tried to remove
the CD-ROM, tried PCMCIA slots 0 and top, tried ISA and PCMCIA bus types and
still could not get the FH/PC card to be activated. I do not have DS/PC to
try with . My HiNote Ultra II works well with WIN 95 and FH/PC card and also
with DOS RL2SETUP.....I even removed my card and Antenna and tried on the
other
person Ultra II with no luck.

Do you know of any one out there at LKG with this setup ( NT V4.0 ) and FH/PC
that is running happly ?????

The presson that is trying to use the Card is from the WIN NT group
specilising
with NT.

Cheers ,

Youda Kopel ,
NPB Melb / Aust.

[Posted by WWW Notes gateway]

Jeff ,

I have attached the WIN NT V4.0 Event Logger section. I hope this help .

Here it is :
Event ID: 7000
Source: Service Control Manager
Description
The RoamAbout FH/PC Card Adapter Driver service failed to 
start due to the following error: 
A device attached to the system is not functioning

Event ID: 5003
Source: rl2winnt
Description
rl2winnt6 : Could not find an adapter. 

Data: Bytes
0000: 00 00 00 00 02 00 5a 00   ......Z.
0008: 00 00 00 00 8b 13 00 c0   ....?..�
0010: 00 00 00 00 00 00 00 00   ........
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........

Many Thanks ,

Youda Kopel ,
NPB Melb / Aust.

[Posted by WWW Notes gateway]

    Hi Youda,
    
    I am not sure what it could be.  First I want to make sure you really
    have the latest driver.  You mentioned the file FHbeta5.zip, but I want
    to make sure it is Beta5B.  The driver (RL2WINNT.SYS) should be dated
    July 25, 1997 and the OEMSETUP.INF dated Sept 13, 96.
    
    With the Multi-media docking station there is only one IRQ available. 
    If the customer has a modem or other PCMCIA card installed, it will not
    find the RoamAbout card.  You may suggest that the customer disables
    either the IR port (IRQ 3) or the parallel port (IRQ 7) and reconfigure
    the RoamAbout card to that setting.
    
Regards,
Jeff
RoamAbout Wireless Engineering 
http://www.networks.digital.com/dr/wireless
http://www-wireless.lkg.dec.com (Internal Only)
http://www.networks.digital.com
==========================================================================
    

Thank Jeff ,

The files we are using are the correct ones ( RL2WINNT.SYS & OEMSETUP.INF ).

I'll get the customer to try different IRQs, will let you know.

Cheers ,

Youda Kopel ,
NPB Melb.

[Posted by WWW Notes gateway]

    Thanks Jeff....
    
    I found the kit and it should solve my issues. 
    
    Jeff