| Title: | Terminal Server Manager |
| Notice: | For TSM Kit location see note 2.0 |
| Moderator: | MRLAT::RASPUZZI |
| Created: | Wed Nov 05 1986 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 789 |
| Total number of notes: | 2904 |
Folks
I have a customer who is running TSM V2.1 Eco 5 on VMS V6.2 with DECnet/OSI 6.3
ECO 6. The customer has also installed DNVOSIV63-ECO6-EXTRA.BCK;1 which
contains a number of fixes to OSI.
When doing a use server from within TSM, and he holds down a keystroke, there is
a delay of about 2 or 3 seconds before the cursor catches up. Now I realize that
this is probably normal, as I was seeing this on my setup in the CSC. But when
the customer goes into pasthru mode, and types "DEFINE PORT" he only gets
"DEFNE PRT". The customer insists that this is not a typo. If he continues to
use the server, he thrown off with a CCR-Response Timeout. The server is a
ds200 running Bl40. Does anybody have any ideas? Is this expected because the
DS200 is old hardware, or are we seeing a problem here.
Regards
Steven Freke
UK CSC
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 786.1 | CSC32::D_SHAVEY | Tue Apr 22 1997 11:23 | 9 | ||
Steven,
Is the system with TSM and the terminal on the same network, as if they
are, this is not a normal response, and no, the ds200 should not be the
cause of this problem. If this is a 56kb link, or something similar to
this, this could be caused by congestion, etc on the link.
Darrell Shavey
| |||||
| 786.2 | KERNEL::FREKES | Like a thief in the night | Tue May 06 1997 04:48 | 7 | |
Darrell
Unfortunatley the customer left the company, and took his problem with
him. No word from the customer, so the call was closed.
Thanks for the help though.
Steven
| |||||