| Title: | EtherWORKS Notes Conference |
| Notice: | WWW server at http://ftp.digital.com/pub/DEC/adapters/ |
| Moderator: | NETCAD::STEFANI |
| Created: | Wed Sep 01 1993 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1318 |
| Total number of notes: | 5673 |
We have problem on Prioris HX 6000 with Netware V4.1 during installation.
When we do express setup using Quick Launch V2.5- Ethernet card
(embedded) works. But problem is Express setup partitions entire
2 GB as SYS partition. Same time if a custom setup (or conventional setup)
is done using the ethernet card driver extracted from Quick Launch the
following error message is displayed
"Server - 4.10 1586 Loader cannot find public Symbol MSMRd config space 32
Server - 4.10 1586 Loader cannot find public Symbol MSMRd config space 8
Server - 4.10 1586 Loader cannot find public Symbol MSMwrt config space 32
Server - 4.10 1586 Loader cannot find public Symbol MSMwrt config space 16
Server - 4.10 1586 Loader cannot find public Symbol MSMwrt config space 8
Server - 4.10 1586 Loader cannot find public Symbol MSM Scanbus Info
Server - 4.10 1586 Loader cannot find public Symbol MSM Search Adapter"
Any ideas about this problem. Any suggestions are welcome.
Regards,
CHENTHIL
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1295.1 | Try PCBU | NETCAD::THOMPSON | Wed Apr 09 1997 10:33 | 9 | |
If this is a DC21142 that is in your system, it is not supported by
the folks here in the Network Adapter group. This is a controller that
only the PCBU uses in their onboard systems - you need to get an answer
from them. They might see your note in this conference or you can try
one of the PC-related conferences.
regards,
-Brenda
| |||||