| Title: | DECnet/OSI for {ULTRIX,OSF/1} |
| Notice: | Indicate version and platform when writing...see #2 for kits |
| Moderator: | BULEAN::CARR |
| Created: | Wed Sep 25 1991 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2187 |
| Total number of notes: | 10469 |
Hi,
I'm not an expert with Unix and I have a customer with some errors
in the session control application cml of decnet/osi and he claims us an
explanation of this.
The customer has the following versions:
DIGITAL UNIX V3.2F (Rev 6973)
DECnet/OSI for DIGITAL UNIX V3.2A-0 (Rev 2319)
Below is the configuration of the cml application and its counters.
The counter with the errors is RESOURCE FAILURE and we would like to know the
possible reasons of these errors.
ncl> show sess control app cml all
Node 0 Session Control Application cml
AT 1997-02-28-12:59:27.528+01:00I0.536
Identifiers
Name = cml
Status
Process Identifiers =
{
}
Active Instances = 0
UID = D2122000-3F9F-11CF-8008-08002B33D2A8
Last Request = 1997-02-28-12:41:51.123+01:00I0.518
Characteristics
Addresses =
{
number=19
}
Incoming Proxy = True
Node Synonym = False
Image Name = /usr/sbin/cml
User Name = "daemon"
Data Abstraction = Stream
Accept Mode = Deferred
Programming Interface = Phase IV
Maximum Instances = 0
Allow DECnet Internet Gateway Access = False
Counters
Total Invocations = 4033
Access Control Violations = 0
Resource Failures = 56
Creation Time = 1995-12-26-17:09:47.379+01:00I-----
Thanks for any answer
Ventura Acera
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2136.1 | VAXCPU::michaud | Jeff Michaud - ObjectBroker | Fri Feb 28 1997 09:42 | 9 | |
That counter is incremented if any of the following calls fail: fork(2) sia_ses_init sia_ses_estab sia_ses_launch or if "Maximum Instances" is defined, then "Active Instances" is already at the max, or "Image Name" is not set. | |||||
| 2136.2 | Maybe NETview? | MDR01::VENTURA | MCS Madrid | Mon Mar 03 1997 07:18 | 22 |
Thanks for the answer,
I don't have defined "Maximum Instances" and the "Image Name" is
correctly set. The object works properly with ncl commands from others
systems.
This system is monitored from Polycenter Netview in other system.
Is't possible that some interaction with that system give us the
"Reosurce Failure" errors?.
The customer says that every half hour he sees a console message:
Feb 2 19:46:47 cpdes dnascd[7554]: Connect from 40.16::uic=[0,0]root
for application cml under daemon
Feb 2 19:46:47 cpdes cml[7554]: main (0): call to CMIP_Listen failed,
status=585
Feb 2 19:46:47 cpdes dnascd[355]: Process exit (PID 7554), status 1
where the 40.16 node is the system with Netview installed.
Any suggestion?
Thanks
Ventura Acera
| |||||
| 2136.3 | UPSAR::WALLACE | Digital: A Dilbertian Company | Mon Mar 03 1997 16:10 | 16 | |
The message about "CMIP_Listen failed" means cml doesn't like
something about whoever is trying to connect to it. Unfortunately,
585 (CMIP_fatalInternalError) gets returned under a lot of
different conditions.
A cml trace *might* help pin this down. To set up tracing do:
# cd /usr/sbin
# ./cml -t
# mv cml cml.exe
# cp cml.sh cml
The trace files will show up as /tmp/cml.log.*
Vince
| |||||