Conference noted::dnu_osi

    Does anyone have the decnet patches?
    
    netrix has been down for a couple of days and I need the
    4.0A patches for the event logger problem (can't have two
    outbound streams)
    
    thanks,
    Mike

can somebody have look at netrix:: or enomem:: as I am trying already 2 days
to get access but the hosts are unreachable

Thanks

regina

    netrix seems to be down again. In fact several machines in LKG seem to
    be unavailable via decnet, although some are available via tcp/ip.
    
    Are the patches anywhere else?
    
    (I put a note in yesterday but it seems to have gone)
    
    
    thanks,
    Mike

Netrix isn't down.  Netrix was moved along with a number of other machines to
the new EDS offices at Crosspoint (Wang towers new Chelmsford).  There's a
misconfigured router which is causing most of the connectivity problems.  We've
been waiting for the person responsible for the router to come and correctly
configure it.

Netrix should be available now.  The network is currently
working, although we may experience some outages as other
problems within LKG are addressed, but hopefully they
won't last as long.

DECnet and IP are both working, although it is not possible
to establish IP connections with anything in 16.20.xxx.xxx
because of the current configuration of the network in
Littleton.

-Deneen

    
    I'm trying to access the DECNET/OSI V3.2B (Unix) kit with no success,
    as NETRIX currently seems to be 'unreachable'...
    
    $ dir  trix::"/kits"
    %DIRECT-E-OPENIN, error opening TRIX::"/kits" as input
    -RMS-E-FND, ACP file or directory lookup failed
    -SYSTEM-F-UNREACHABLE, remote node is not currently reachable
    
    $ set h netrix::
    %SYSTEM-F-UNREACHABLE, remote node is not currently reachable
    
    $ set h 4846::
    %SYSTEM-F-UNREACHABLE, remote node is not currently reachable
    
    # dls netrix::/kits
    dls: directory list failed, Remote node says node unreachable
    
    At one point NETRIX made a fleeting appearance (<5 mins), but not 
    long enough for me to get the kit!. Are the problems mentioned in 
    .-1 still ongoing?, if so how/when will I be able to get the kit?. 
    
    Thanks,
    
    Paul.
    

LKG has had routing problems since yesterday evening.  Since Crosspoint is
hooked into the easynet via LKG, you're going to have trouble.  Currently it
looks like LKG is back on the air, but Crosspoint still is not.  All I can
suggest is to be patient and try again later.

--Scott