Conference noted::atm

964.0. "ATMswitch static route config" by NNTPD::"eric gan@bej" (ericgan) Thu Jun 05 1997 03:37

Hi there,

I am doing an ATMswitch interconnect testing for an important customer, 
What the problem is that the Vnswitch Ea #2 is unable to recognize the LECS
well known address of ATMswitch900 #1 when it goes through NNI between the 
2 ATMswitch900's, so I can not get the EAs link together.
Here is all what I have done:

EA#1----------1.3 ATMswitch#1 1.4=======1.3 ATMswitch#2 1.4---------EA#2
The LED indicators of connected ports all are on with color "GREEN".

I only have the LANE services enabled on ATMswitch900 #1, include LECS, LES 1,
BUS 1 and ELAN 1. Keep these disabled on the ATMswitch900 #2.

On ATMswitch900 #1:
Go into OBM.

Choose the routing/signaling option
Choose the set/show configuration option
Choose the Static routes option
Choose the Configure static routes option

For an ATM prefix use 47
Choose yes for partial match
choose forwarding slot as default (1)
Choose forwarding port 0 
Choose yes for export route.

Now, it is still not working. But, I can saw the well known LECS address
(47xxxxxxxxx) in ATMswitch#2 by rou_learned_routes command, it's from
ATMswitch
#1, on #2 I have done nothing. Only the EA#1 join into ATMswitch#1.That's all.
It looks like the two ATMswitches know each other, but stop here. 
Do we need to setup something on EA#2? Add the LECS address into EA? If yes,
how to do it?

Results:

ATMswitch 900 #1
ATMswitch-> snmp_show_all
link  1.1: NOT CONNECTED HEAD WAIT Carrier Dn ESC N FM N Prefixes OK
link  1.2: NOT CONNECTED HEAD WAIT Carrier Dn ESC N FM N Prefixes OK
link  1.3: REGISTERED    HEAD GOOD Carrier Up ESC Y FM N Prefixes OK
link  1.4: REGISTERED    HEAD GOOD Carrier Up ESC Y FM Y All prefs rejected
link  1.5: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.6: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.7: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.8: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
value = 0 = 0x0
ATMswitch-> rou_addr_print

        Slot 1, Link 0
47:00:79:00:00:00:00:00:00:00:00:00:00:00:a0:3e:00:00:010
0
        Slot 1, Link 0
39:99:99:00:00:00:00:00:00:f8:6b:0d:40:00:00:f8:6b:0d:520
0
        Slot 1, Link 0
39:99:99:00:00:00:00:00:00:f8:6b:0d:40:00:00:f8:6b:0d:510
0
        Slot 1, Link 0
39:99:99:00:00:00:00:00:00:f8:6b:0d:40:00:00:f8:6b:0d:500
0
        Slot 1, Link 3
39:00:00:00:00:00:00:00:00:00:00:00:00:00:00:f8:85:fa:0e0
0

        Total End System Addresses Known 5
value = 37 = 0x25 = '%'
;after add static route:
ATMswitch-> rou_learned_routes

Route for
         net 47:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
        mask ff:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
is thru Slot 1 Link 0.

        Total routes known 1
value = 0 = 0x0

ATMswitch 900 #2
ATMswitch-> snmp_show_all
link  1.1: NOT CONNECTED HEAD WAIT Carrier Dn ESC N FM N Prefixes OK
link  1.2: NOT CONNECTED HEAD WAIT Carrier Dn ESC N FM N Prefixes OK
link  1.3: REGISTERED    HEAD GOOD Carrier Up ESC Y FM Y All prefs rejected
link  1.4: REGISTERED    HEAD GOOD Carrier Up ESC Y FM N Prefixes OK
link  1.5: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.6: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.7: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
link  1.8: NOT CONNECTED HEAD TEST Carrier Dn ESC N FM N Prefixes OK
value = 0 = 0x0
ATMswitch-> rou_addr_print

        Slot 1, Link 4
39:00:00:00:00:00:00:00:00:00:00:00:00:00:00:f8:86:48:0e0
0

        Total End System Addresses Known 1
value = 37 = 0x25 = '%'
ATMswitch-> rou_learned_routes

Route for
         net 47:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
        mask ff:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
is thru switch 00:00:f8:6b:0d:40.

        Total routes known 1
value = 0 = 0x0

Answer is needed urgently.
Thanks,
eric
[Posted by WWW Notes gateway]