[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference noted::atm

Title:	atm

Moderator:	NPSS::WATERS

Created:	Mon Oct 05 1992
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	970
Total number of notes:	3630

956.0. "ILMI tracing possible on DUNIX ... ?" by BERFS4::NORD () Tue May 27 1997 13:28

    
    
    Hi you out there in the world of ATM,
    
    
    I have a very simple question:
    
    Is there any possibility to trace the ILMI signalling on DUNIX 4.0x at
    this time? Or are we able to trace ILMI in the future on DUNIX?
    
    The backround is:
    We have some problems with systems with more than one ATM interface and
    LANE V1.0, one of the interfaces is going into the state "S_INITIAL",
    and we want to know whether there is any further signalling or not.
    
    B.w. the systems have two CPUs, "atmsig" is started with "uni=3.1" and
    they are connected to GIGAswitch/ATM 5-slot with CMM V1.82 and LC
    V.2.1.3 and the interfaces of the systems are connected to different
    GS/ATM (in Firewall slang to the "blue net" and the "red net", no
    connection is between the GS/ATM).
    
    Many thanks in advance
    
    Wolfgang Nord
    MCS@BERLIN@GERMANY

T.R Title User Personal
Name Date Lines

956.1 SMURF::PSH Per Hamnqvist, UNIX/ATM Tue May 27 1997 14:45 19

T.R	Title	User	Personal Name	Date	Lines
956.1		SMURF::PSH	Per Hamnqvist, UNIX/ATM	`Tue May 27 1997 14:45`	19
	Hi Wolfgang -- Although you are asking to trace ILMI, you provide no information suggesting that ILMI is actually not working. If you check status on the device with: #atmsig status driver=lta0 What does it say about ILMI? If ILMI appears to be Ok, then perhaps it is another problem. What does it say about Signaling status? You could also try: #atmsig trace driver=lta0 state=on read On the machine where it is not working; replace lta0 as appropriate. Cheers, >Per

   Hi Wolfgang --

   Although you are asking to trace ILMI, you provide no information
   suggesting that ILMI is actually not working. If you check status
   on the device with:

   #atmsig status driver=lta0

   What does it say about ILMI? If ILMI appears to be Ok, then perhaps
   it is another problem. What does it say about Signaling status?
   You could also try:

   #atmsig trace driver=lta0 state=on read

   On the machine where it is not working; replace lta0 as appropriate.
  
   Cheers,

   >Per