[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference noted::atm

Title:	atm

Moderator:	NPSS::WATERS

Created:	Mon Oct 05 1992
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	970
Total number of notes:	3630

953.0. "Problems with setting SDH to SONET framing" by STU03::RUEGGEN () Mon May 26 1997 02:52

	Hello,

	I recently changed the framing setting on a not connected
	STS-3c interface from SONET to SHD, which worked as expected.

	When I tried to set it back to SONET the setting was accepted
	but I still saw the framing as SHD. Whatever I did, I could not
	change it back to SONET.

	The switch is running 2.1.1

	Any hints ?

	regards
	Ulrich Rueggen

T.R Title User Personal
Name Date Lines

953.1 Known Problem NNTPD::"[email protected]" Youda Kopel Mon May 26 1997 22:28 13

T.R	Title	User	Personal Name	Date	Lines
953.1	Known Problem	NNTPD::"[email protected]"	Youda Kopel	`Mon May 26 1997 22:28`	13
	Hi There Ulrich , Yes, it is a known problem with SONET / SDH when you use ver 2.1.1 . I strongly recommand you move to ver 2.1.3 or V2.1.4 that fixed this problem. Good Luck , Youda Kopel , NPB Melb / Aust. [Posted by WWW Notes gateway]

Hi There Ulrich ,

Yes, it is a known problem with SONET / SDH when you use ver 2.1.1 . I
strongly
recommand you move to ver 2.1.3 or V2.1.4 that fixed this problem.

Good Luck ,

Youda Kopel ,
NPB Melb / Aust.

 
[Posted by WWW Notes gateway]