[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference noted::atm

Title:atm
Moderator:NPSS::WATERS
Created:Mon Oct 05 1992
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:970
Total number of notes:3630

948.0. "ATMswitch 900 interconnect" by NNTPD::"ERIC GAN@BEJ" (ERICGAN) Wed May 21 1997 22:51

Hi,

How to connecte two ATMswitch 900F? How to configure it? For the les,
lecs,Bus,
and NNI ...? Does the ATMswitch support ATM to backplan by now?
I have two ATMswitch 900F each connected with a VN EA, they are working fine
on each
side (only can be connected with outside ports), but can not link the two
sides
together.
BTW, who is the ATMswitch product manager?

Many thanks
eric
[Posted by WWW Notes gateway]
T.RTitleUserPersonal
Name		DateLines
948.1What I have done:NNTPD::"eric gan@bej"ericganMon May 26 1997 11:2748
Hi,

Here is some thing I have done:

PC1-----EA #1========ATMswitch900 #1=======ATMswitch900 #2=======EA #2----PC2
------: Ethernet
======: ATM(155M)

The configuration of ATMswitch 900 #1:
      enable LECS, LES 1, BUS 1, ELAN 1, I can saw the local VN EA which
directed
      connected with #1 act as a LES client, seems works fine.
      and configured the Static Routes as follows:
          ATM Prefix (HEX digits): 39  <-- ATM prefix of all devices
(399999000000..)
          Allow Partial Match? (1-Yes, 0-No): 1
          Forwarding Slot (1-6, 8-14): 1
          Forwarding Port (0-8): 0     <---- use local service
          Export Route (1-Yes, 0-No): 1
          Instance created OK
          Added route
          Net  39:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
          Mask ff:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
          through slot 1 link 1.
          Exported routed added to LSP

The configuration of ATMswitch 900#2:
      disable LECS, and(or not) disable LES, BUS, ELAN, 
      and configured the Static Routes as follows:
          ATM Prefix (HEX digits): 39  <-- ATM prefix of all dev.
(399999000000...)
          Allow Partial Match? (1-Yes, 0-No): 1
          Forwarding Slot (1-6, 8-14): 1
          Forwarding Port (0-8): 3     <-- which connected to this port from
#1
          Export Route (1-Yes, 0-No): 0
          Instance created OK
      I can not get the EA #2 joining to ATMswitch #1. I mean I can not get
the
link between ATMswitchs working! :-(
What is wrong with me?
    
The firmware of ATMswitch is version: 2.4F
      
The help be required urgently,
Thanks,
eric
[Posted by WWW Notes gateway]