| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 902.1 | use a newer driver | WASNT::"[email protected]" | Born to be Mild | Tue Apr 15 1997 11:48 | 5 |
| Get a newer driver, both 1.0 and 1.1 are way old. Use the NPB
website: www.networks.digital.com
doug
|
| 902.2 | ATMworks 350 doesn't work in v2.1(ft) | DEKVC::GEUMJOONLEE | | Wed Apr 16 1997 21:30 | 15 |
| Hi
I installed new driver(field test v2.1 for winnt 4.0) of ATMworks 350
in ALPHA 4000 WINNT 4.0 SYSTEM, but we can not connect to FORE ATM switch
that set up SVC LANE EMULATION.
1. The messages of EVENT LOG in WINNT SYSTEM is as follows.
"dglpb1 ; It doesn't work DEVICE attached to system"
2. The two LED status of ATMworks 350 card is off.
Could you help me ?
GJ lee
|
| 902.3 | Here are some things to try | WASNT::"[email protected]" | Born to be Mild | Thu Apr 17 1997 13:46 | 15 |
| It sounds like the OS cannot find the ATMworks 350 NIC.
Here are some suggestions:
- Make sure the card is properly seated in the installation.
- Use the control panel to remove and reinstall. It could be that
you did an update an something went wrong.
- Make sure that your console is up to date.
- Make sure you try to do a simple 1 ELAN install first.
- When talking to the FORE switch, you might have to manually specify
the ATM address of the LES.
let me know if you have any luck.
doug
|