[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | atm |
|
| Moderator: | NPSS::WATERS |
|
| Created: | Mon Oct 05 1992 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 970 |
| Total number of notes: | 3630 |
899.0. "GS/ATM, DAGGL errors explain please ..." by BERFS4::NORD () Thu Apr 10 1997 07:20
Good morning, good afternoon, good evening and all the other times
this nice earth has,
here are some experiences I have made with my first GS/ATM 5-slot
installation and some errors I have found, which are not described
in the documentation:
At first:
Read the documentation of the DAGGL-BA BEFOR you buy a DAGGL-BA, so you
can't forget to buy a DAGPL-AA also! (Qustion: Is this mentioned else-
where, 'cause customer got 10 DAGGL-BA but all without this funny
DC-DC-converter? Beside, it has a nice price, about 300 dollars for
two chips!)
Just two days later we got two of the DAGPL-AA, so we are able to
install two of the linecards in one GS/ATM. So we got our next problem:
Clock modul is V1.82 and the two linecards are at V2.0. The GS/ATM
boots, but the two linecards showed MOD LED solid amber. This is
undocumented, the error message on the console is:
System initializing...
/******************************************************************/
/****** diag_selftest 0:00:36 ***********/
+++++++++Diagnostic Failure: <57>, SUNI 1 access error .
/**** SelfTest Complete. FAILED. Time since boot: 0:01:01 ****/
/******************************************************************/
waiting at barrier 1: self test
QLC in Slot 1 failed: 'SUNI 1 access error ' (BNC)
QLC in Slot 4 failed: 'TestData internal line 1' (MMF)
Selftest failed, system initialization aborted.
GIGAswitch/ATM-> IP Address Set from flash 195.66.114.5 Mask ffffff
So we decided to upgrade the two linecards, it seems, that CMM V1.82
didn't understand the V2.0 (is documented elsewhere?).
"Versions" showed Release 2.0FT for Rom and App.
One hour later we have successfully upgraded the two linecards to
V2.1.3, the latest we found at gatekeeper. After a nice DE/SMF and
a reboot all seems to be ok, the linecards MOD LED are stabil green.
So I have done a DE/SM0 and rebooted the GS/ATM. And so my next problem
started:
The linecards are going through the self-test and minutes later the
LEDs showed:
Master Line Card (Slot 1):
MOD LED: amber
Line 1: green
Line 2: green
Line 3: off
Line 4: off
Second Line Card (Slot 4):
MOD LED: green
Line 1: green
Line 2: green
Line 3: green
Line 4: green
One or two minutes later, the linecard in slot 4 showed MOD LED and
Line 2- and Line 4-LED amber, the CMM LED is amber and the GS/ATM is
rebooting!!! The mentioned LED code isn't documented, so I have to test
which linecard is broken. With testing and reading (and don't under-
standing) the errorlog, I found two hours later, that the linecard in
slot 1 is broken, the second linecard (formerly in slot 4) as Master
Line Card in slot 1 without the other linecard is working well.
The problem is:
The LED code shown above isn't documented, so I didn't know, what it
wants to tell me. And displaying the errorlog at clock-level and on
GIGAswitch/ATM-level on my laptop and cutting and pasting the output
to a notepad-window is always disrupted by the rebooting of the GS/ATM.
So I have to play a little around to get the GS/ATM stabil to get the
informations.
Here is what I get:
The system is rebooting (linecards without selftest):
flashApp_verify_checksum: calling task: tRootTask
System initializing...
ELAN 1 created.
LES 1 created.
BUS 1 created.
gsmp init
GIGAswitch/ATM->
The system is rebooting (with linecard selftest):
flashApp_verify_checksum: calling task: tRootTask
System initializing...
/******************************************************************/
/****** diag_selftest 0:00:32 ***********/
+++++++++++++++++Diagnostic Failure: <72>, TestData internal line 4.
Diagnostic Failure: <72>, TestData internal line 4.
/**** SelfTest Complete. FAILED. Time since boot: 0:02:01 ****/
/******************************************************************/
TestData internal line 4QLC in Slot 1 failed: ' TestData internal line 4'
Selftest failed, system initialization aborted.
GIGAswitch/ATM-> versions
RomVersion: Release 2.1.3[356] : Fri Mar 21 13:03:20 EST 1997
AppVersion: Release 2.1.3[359] : Mon Mar 24 12:19:16 EST 1997
Host IP Address for flash downloads 195.66.114.181.
Host Boot Filename /tftpboot/AN3R213.giga.
value = 44 = 0x2c = ','
GIGAswitch/ATM->
BY THE WAY: Why do I have to extend the control file for the
downline load by the name of the system as I named
it in the /etc/bootptab??? (See above)
The errorlog by "alog_printError"
[065] start#38, Apr 9 15:44:39 1997, module#23, code#1
src/app/util/alog.c #598: 1 Master StartNum: 38
[066] start#38, Apr 9 15:44:39 1997, module#22, code#1
src/app/diag_app/diag_selftest. #747: TestData internal line 4TestData in
ternal line 4
[067] start#39, Apr 9 15:49:07 1997, module#23, code#1
src/app/util/alog.c #598: 1 Master StartNum: 39
[068] start#39, Apr 9 15:49:07 1997, module#22, code#1
src/app/diag_app/diag_selftest. #747: TestData internal line 4TestData in
ternal line 4
[069] start#40, Apr 9 15:52:50 1997, module#23, code#1
src/app/util/alog.c #598: 1 Master StartNum: 40
[070] start#40, Apr 9 15:52:50 1997, module#22, code#1
src/app/diag_app/diag_selftest. #747: TestData internal line 4TestData in
ternal line 4
[071] start#41, Apr 9 15:57:18 1997, module#23, code#1
src/app/util/alog.c #598: 1 Master StartNum: 41
[072] start#41, Apr 9 15:57:18 1997, module#22, code#1
src/app/diag_app/diag_selftest. #747: TestData internal line 4TestData in
ternal line 4
Reached the end of error log.
value = 72 = 0x48 = 'H'
GIGAswitch/ATM->
Errorlog by CLK> E
CLK>E
Entry # = 11
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:59:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = A63789D0
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Late Line Card Valid Rx'd
Test Data:
Current Master = 1
Offending Slot = 4
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Entry # = 10
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:54:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 0D87B459
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Late Line Card Valid Rx'd
Test Data:
Current Master = 1
Offending Slot = 4
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Entry # = 9
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:49:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 3C9404A7
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Master Keep-Alive Timeout
Test Data:
Current Master = 1
Sequence Number = 0000005D
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Entry # = 8
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:46:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 69C6D916
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Late Line Card Valid Rx'd
Test Data:
Current Master = 1
Offending Slot = 4
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Entry # = 7
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:42:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 0606CEC2
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Late Line Card Valid Rx'd
Test Data:
Current Master = 1
Offending Slot = 4
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Entry # = 6
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 15:37:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 9A56F8A1
Write Count = 4
FRU Mask = GIGAswitch/ATM CMM
Error ID = Late Line Card Valid Rx'd
Test Data:
Current Master = 1
Offending Slot = 4
Power Enable Register = 0012
Display next entry? (Y to continue)>Y
Then I have cleared the errorlog and got the following:
Entry # = 11
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = DECDF178
Write Count = 6
Display next entry? (Y to continue)>
Entry # = 10
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = DECDF178
Write Count = 6
Display next entry? (Y to continue)>
Entry # = 9
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = DECDF178
Write Count = 6
Display next entry? (Y to continue)>
Entry # = 8
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = DECDF178
Write Count = 6
Display next entry? (Y to continue)>
Entry # = 7
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = DECDF178
Write Count = 6
Display next entry? (Y to continue)>
Entry # = 6
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 17:12:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = F612205D
Write Count = 7
FRU Mask = GIGAswitch/ATM CMM
Error ID = Master Keep-Alive Timeout
Test Data:
Current Master = 1
Sequence Number = 000000C4
Power Enable Register = 0012
Display next entry? (Y to continue)>
Entry # = 5
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 16:36:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 4BB6437D
Write Count = 7
FRU Mask = GIGAswitch/ATM CMM
Error ID = Master Keep-Alive Timeout
Test Data:
Current Master = 1
Sequence Number = 000000C0
Power Enable Register = 0012
Display next entry? (Y to continue)>
Entry # = 4
Logged by Operational Firmware, Revision 1.82
WED 04/09/97 16:32:00
Entry status = 0000 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = 247654A9
Write Count = 7
FRU Mask = GIGAswitch/ATM CMM
Error ID = Master Keep-Alive Timeout
Test Data:
Current Master = 1
Sequence Number = 000000C0
Power Enable Register = 0012
Display next entry? (Y to continue)>
Entry # = 3
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = A8A2EA00
Write Count = 7
Display next entry? (Y to continue)>
Entry # = 2
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = A8A2EA00
Write Count = 7
Display next entry? (Y to continue)>
Entry # = 1
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = A8A2EA00
Write Count = 7
Display next entry? (Y to continue)>
Entry # = 0
Entry status = 0003 [0=valid, 1=wrt_err, 2=invalid, 3=empty, 4=crc_err]
Entry CRC = A8A2EA00
Write Count = 7
CLK>
Ok now I know I have to swap a board, but why these long way to go
till finding out what's wrong???
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|